Taalman - Products

Products

135 results found!

Blank Solder-On Tanks

These blank tanks can be made to any header size or depth required - no samples needed.
Call or fax dimensions.

#2102CK - HDR: 18" x 3 3/8"

Solder-on Complete Tank Set

Top Tank

This tank has a 1 5/8" diameter hose connection 1 3/4" from the edge of the tank to the center of the hose connection, and a 1 3/8" diameter hole on the top of the tank for a fill neck.

Bottom Tank

This tank has a 1 5/8" diameter hose connection 2 3/4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange next to the hose connection.

Frames

These frames are 18 3/8" tall with two mounting brackets on the back, and 5/16" slotted holes along the sides for mounting the shroud.

#122109A - HDR: 25 3/4" x 4 5/8"

Solder-on tank

This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange.

#121208A - HDR: 22 1/4" x 2 7/8

Solder-on tank set

Top Tank
This tank has a 3/4" diameter hose connection, and a 1 1/4" diameter hole in the top of the tank for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/2" NPT flange for a drain, and a PTO cutout in the center of the tank.

#112409B - 15 1/2" x 2 1/2"

Solder-on tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.

#112206A - HDR: 21 15/16" X 4 3/4"

Solder-on Bottom Tank

This tank has a 2" diameter hose connection 2" in from the edge of the tank to the center of the hose connection, a 1010PC (10 plate 10" centers) oil cooler (must be provided by the customer), and a 1/4" NPT drain cock flange on the bottom of the tank.

#112107A - HDR: 21 3/4" x 3 1/4"

Solder-on tank set

Top Tank
This tank has a 1 1/4" diameter hose connection, a 1 1/4" diameter hole in the top center of the tank for a filler neck, and a 1/2" NPT flange.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and a channel welded to the bottom of the tank for mounting purposes.

#111909A - HDR: 23 3/4" x 4 1/2"

Solder-on tank set

Top Tank
This tank has a 1 1/2" diameter hose connection, a 3/4" NPT flange for a sensor fitting, and a 1 3/4" diameter hole in the top center for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.

#111708A - HDR: 17 3/4" x 4 1/4"

Solder-on tank set

Top Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, and a threaded block on each end for mounting the side frames.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 1 1/2" diameter through pipe, and a threaded block at each end for mounting the side frames.

#111207A - HDR: 32 1/4" x 6 3/8"

Liebherr Solder-on Tank

This tank has a 2 3/4" diameter hose connection 6 3/4" in from the edge of the tank to the center of the hose connection, and four 5/16" NC threaded holes on the top of the tank.

#111006B - HDR: 29 1/2" X 4 7/8"

Solder-on top tank

This tank has a pair of 1 5/8" diameter hose connections 2 7/8" in from the edges of the tank to the center of the hose connections, a pair of 1/4" NPT flanges, a 1" diameter heater bypass in the center of the tank, and a 1 3/4" diameter fill neck hole in the top center of the tank.

#110509A - HDR: 17 1/2" x 2 5/8"

Porsche solder-on complete set

Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange, a 22mm fitting for a sensor, and two holes @ 11 1/4" centers for an oil cooler.
Frames
These frames had two 5/16" threaded holes in each.

#110409B-CK - HDR: 29 1/2" x 6"

Solder-on tank set

Top Tank
This tank has a 2" diameter hose connection, a 1/8" NPT flange, a hole for a filler neck, a 3/8" NPT flange, and a mounting bracket with 1/2" NC threaded holes.
Bottom Tank
This tank has a 2" diameter hose connection, a 3/8" NPT flange for a drain, two mounting brackets with holes spaced @ 25", and an 18 plate oil cooler with fittings spaced @ 18" (1818PC).

#110110A - HDR: 7 5/8" x 2"

Heater Core tank set

The one tank has two 5/8" diameter hose connections separated by a baffle, and the other tank is blank.

#102909A - HDR: 13 5/8" x 2 1/8"

Perkins solder-on tank set

Top Tank
This tank has a 1 3/8" diameter hose connection, two 5/16" NC threaded nuts on the fan side for the shroud, two 5/16" NC threaded nuts on the end to attach the frames, two clips on the fan side for an overflow tube, and a hole in the top center for a filler neck.
Bottom Tank
This tank has a 1 3/8" diameter hose connection, two 5/16" NC threaded nuts on the fan side for the shroud, two 5/16" NC threaded nuts on the end to attach side frames, and two clips on the fan side for an overflow tube.

Note: for this set, samples must be supplied by the customer.

#102207A - HDR: 16 3/4" x 4"

Pump Radiator tank set

Top Tank
This tank has a 1 1/4" diameter hose connection, a 1/4" NPT flange on the top of the tank and one facing the engine.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, and a 1/4" NPT flange facing the engine.

#102009A - HDR: 26 1/2" x 3 3/4"

Solder-on Bottom Tank

This bottom tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain.

#101909B - HDR: 16 5/8" x 2 1/4"

Solder-on tank set

Top Tank
This tank has a 1 1/4" diameter hose connection, and a 1/1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, and a 1 1/4" NPT flange for a drain.

#101107B - HDR: 25 3/4" x 4 3/8"

Solder-on tank set

Top Tank
This tank has a 2" diameter hose connection 2 3/4" long and 5" from the edge of the tank to the center of the hose connection, a 1 1/4" diameter hole for a filler neck, and a deflection baffle.
Bottom Tank
This tank has a 2" diameter hose connection 3" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on the grill side of the tank.

Note: both tanks have a notch in the center.

#101007A - LGTH: 27 1/2"

Solder-on side frames

These solder on side frames have channels 4" wide by 1/2" deep, and have a length of 27 1/2".

#100608A - HDR: 28 3/16" x 4 7/8"

Solder-on Top Tank

This tank has a 2 1/4" hose connection, a 3/8" NPT flange, and a 1 3/8" diameter hole in the top center for a fill neck.

#100407A - HDR: 18 5/8" x 5 1/8"

Solder-on tank set

Top Tank
This tank has a 1 1/2" diameter hose connection 2 3/4" long and 2 3/4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange.
Bottom Tank
This tank has a 1 1/2" diameter hose connection 2 3/4" long and 1 1/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange, and holes to accommodate an oil cooler.

#100209B - HDR: 25 3/4" x 4 3/4"

Solder-on Bottom Tank

This bottom tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain.

#100206A - HDR: 28 1/2" X 6 1/2"

Crane solder-on complete set

Top

Top tank is 3" deep with a 2 1/2" hose connection 10" from the edge of the tank to the center of the hose connection. A 5" tall pipe at the top-right of the tank accommodates the truck style filler neck.

Bottom

Bottom tank is 2" deep with a 2 1/2" hose connection, and a pair of 1/2" NC threaded studs for mounting.

Side Frames

The frames are 30 1/2" tall, each with 3 @ 3/8" NC threaded nuts to accommodate mounting of the shroud.

Shroud

The shroud has a 27" diameter hole for the fan, and has 3 @ 7/16" slotted holes along each side for mounting the shroud onto the frames.

#100108A - HDR: 21 7/8" x 3 1/2"

Mine Cat solder-on tank set

Top Tank
This tank has a 1 1/2" diameter hose connection, a 1" diameter hole for a filler neck, and a block on each side with four threaded holes for mounting.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, four mounting pins, and two mounting blocks spaced @ 14 1/2" centers.

#093011A - HDR: 20 1/4" x 2 1/8"

Bentley solder-on tank set

Top Tank
This tank has a 1 1/2" diameter hose connection, a 3/8" diameter mounting pin on each end, four 1/4" NC threaded nuts, and a 3/8" diameter expansion tube.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 3/8" diameter mounting pin on each end, four 1/4" NC threaded nuts, and a 1/4" NPT flange for a drain fitting.

#092812A - HDR: 19" x 3 5/8" - 14 lbs.

Massey Ferguson Tractor solder-on tank set

Top Tank
This tank has a 1 1/2" diameter hose connection 4 3/4" from the edge of the tank to the center of the hose connection, a 3/4" diameter hose connection 6" from the edge of the tank to the center of the hose connection, a baffle splitting the tank from top to bottom, and a hole on the top for a filler neck.
Bottom Tank
This tank has a 1 1/2" diameter hose connection 2" from the edge of the tank to the center of the hose connection, a 3/4" diameter hose connection 2 3/4" from the edge of the tank to the center of the hose connection recessed in approx. 1/2".

#092707A - HDR: 16" x 2 1/2"

Lawn Mower tank set

Top Tank
This tank has four 1/4" NC threaded nuts for mounting side frames, a 1" diameter hose connection, two angled brackets with 5/16" diameter holes, and a 1" diameter hole to accommodate a filler neck.
Bottom Tank
This tank has four 1/4" NC threaded nuts for mounting side frames, a 1" diameter hose connection, a 1/4" NPT flange for a drain cock, and two mounting studs.

Samples required to build this set.

#092507B - HDR: 21" x 4 1/2"

Solder-on Tank

This tank has a 2 1/4" diameter hose connection 2 1/4" from the edge of the tank to the center of the hose connection.

#091510A - HDR: 14" x 2 1/2" - 15 lbs.

Cushman Suzuki solder-on tank set

Top Tank
This tank has a 3/4" diameter hose connection and a hole in the top for a hose connection.
Bottom Tank
This tank has a 3/4" diameter hose connection with a 1/2" diameter overflow tube coming out of the side, two 1/4 NPT flanges (one for a drain), two mounting ears each with a 1/4" NC holes @ 9 3/4" centers.

#091107B - frame - 4 1/4" wd. (orig. 3 1/4" wd.)

Solder-on Side Frame

This frame has seven 5 /16" NC threaded nuts along the back of the rail for mounting the shroud, and other various items.

#091107A - Fan Shroud

Solder-on Fan Shroud

This shroud has a 19 7/8" diameter hole for the fan, and 6 slotted holes to mount the shroud to the side frames. Overall dimensions are - 21 1/4" x 19 7/8" x 2 1/4" deep.

#090711A - HDR: 28 3/4" x 5 1/4"

Terex solder-on complete set

Top Tank
This tank has a bolt-on style flange connection, two 14mm x 1.5mm fittings, and two threaded bars welded to the top with several 14mm x 1.5 mm & 10mm x 1.5mm threaded mounting holes.
Bottom Tank
This tank has a bolt-on style flange connection, two 14mm x 1.5mm fittings, and two threaded bars welded to the top with several 14mm x 1.5 mm & 10mm x 1.5mm threaded mounting holes.
Sides
One side is a simple channel with several slotted holes along the edge, and the other side is flat to support the core.

Original unit was all aluminum.

#090508B - Frames

Solder-on Side Frames

These frames have various brackets for mounting. Frame #1 (shown here at top) also has three 1/4" NC threaded nuts on one of the brackets.

#083007A - HDR: 31" x 6"

Solder-on complete tank set

Top Tank
This tank has a 2" diameter hose connection, a 1" diameter bypass connection in the center pointing towards the passenger side, and a 1 3/4" diameter hole for a filler neck in the top center of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 6" from the edge of tank to the center of the hose connection.
Sides
These side frames have a 6" outside diameter, they are 1" deep and 40" long.

#082906A - HDR: 27 5/16" X 5 1/16"

Solder-on bottom tank

This bottom tank has a 2 1/4" diameter hose connection 2 1/4" from edge to center, and a 1" diameter bypass outlet 7" from edge to center. This tank can be made with 1 3/4" diameter oil cooler holes only, or with the oil cooler installed. (a 1418PC plate cooler is shown here.)

#082409B - HDR: 16" x 3 1/4"

Complete Radiator Set

TopTank
This tank has a 1" diameter hose connection, and a 1 3/8" hole for a filler neck.
Bottom Tank
This tank has a 1" diameter hose connection, a 1/2" NPT coupling for a drain, two 3/8" NC threaded mounting studs, and a 1/4" NPT flange on the grill side.
Side Frames
These frames are 20 1/2" long with two 1/4" NC threaded holes.

For this set, samples must be provided by the customer.

#072712A - HDR: 25 1/4" x 3 3/8" - 6 lbs

Solder-on tank

This tank has a 2 1/4" diameter hose connection 1 1/2" from the edge of the tank to the center of the hose connection.

#072711A - HDR: 34 3/4" x 4 5/8"

Highway Paver solder-on tank set

Top Tank
This tank has a 1 1/2" diameter hose connection, 5 1/2" diameter through-hole for a CAC casting, a 1/2" NPT flange for a sensor fitting, a 1 1/4" diameter hole for a fill neck, two 1/4" NPT flanges, and a deflection baffle.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, a 5 1/2" diameter through-hole for a CAC casting, and a 1/4" NPT flange for a drain fitting.

#072709A - HDR: 24" x 4 1/4"

Sakai Loader tank set

Top Tank
This tank has a 2" diameter hose connection 3" long, and 7 1/2" from the edge of the tank to the center of the hose connection.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 3 1/2" long, and 5" from the edge of the tank to the center of the hose connection.

#072607A - HDR: 18 3/4" x 3 1/4"

Tractor solder-on set

Top Tank
This tank has a 1 1/2" diameter hose connection, a 1 1/4" diameter hole for a filler neck, and a bracket for an overflow hose.
Bottom Tank
This tank has a 2" diameter hose connection angled @ 90^o to the left, and a 1/4" NPT flange on the bottom of the hose connection for a drain cock.

#072407B - HDR: 21 1/4" x 4"

Solder-on Tank Set

Top Tank
This tank has a 1 1/4" NPT nipple 8 1/2" long, and a bracket on each side for mounting.
Bottom Tank
This tank has two 1 1/4" NPT nipples 8 1/2" long, a bracket on each side for mounting, and a baffle offset from the center.

#071807A - HDR: 19 3/8" X 3 3/4"

Solder-on Tank Set

This tank has a 2" diameter hose connection with a 3/8" NPT flange for a drain welded into it, and a pair of 1/2" NC threaded studs @ 13 1/2" centers for mounting (original tank had 7/16" NF studs).

#071307A - HDR: 14 3/4" X 2 1/2"

Tractor solder-on tank

This tank has a bolt-on style connection.

#071212A - HDR: 19 7/8" x 3 1/4" - 4 lbs

Solder-on bottom tank

This tank has a 2 1/4" diameter hose connection 2 3/4" from the edge of the tank to the center of the hose connection, and 1/4" NPT flange for a drain fitting. Tank tapers near the ends.

#071210C - HDR: 10 1/4" x 1 3/4"

Solder-on tank set

These tanks have a 1" diameter hose connection. The top tank has a 3/4" diameter hole, and the bottom tank has a 1/4" NPT flange for a drain/expansion fitting.

#071210B - HDR: 27 1/4" x 5 1/4"

Blank brass solder-on tank

Made to custom specifications.

#071009A - HDR: 16" x 2 7/8"

Solder-on Tank Set

Top Tank
This tank has a 1 3/4" diameter hose connection, a 5/8" diameter bypass hose that bends @ 90^o, and two mounting brackets.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and identical mounting brackets as the top tank.

#070407A - HDR: 32 1/8" X 6 7/8"

Solder-on Tank

This tank has a 2 3/8" diameter hose connection.

#063011B - HDR: 14 1/2" x 1 7/8" - 12 lbs.

Paver solder-on tank set

Top Tank
This tank has a 1" diameter hose connection, four 1/4" NC threaded nuts to attach side frames, and a stand pipe for a fill neck.
Bottom Tank
This tank has a 1" diameter hose connection, four 1/4" NC threaded nuts to attach side frames, a PTO cutout, two mounting studs @ 9 1/4" centers, and a 1/4" NPT flange for a drain fitting.

#062911C - HDR: 25 3/4" x 4 1/4" - 7 lbs.

Detroit Diesel solder-on bottom tank

This tank has two 5/16" NC threaded mounting studs @ 16" centers, and a 1/4" NPT flange for a drain fitting.

#062907A - HDR: 37 1/2" X 6 3/4"

Solder-on Tank Set

Top Tank

This tank has one bolt-on flange with a 3 1/2" diameter hole 9 7/8" from the end of the tank, and 2 5/8" from the side of the tank.

Bottom Tank

This tank has one bolt-on flange with a 3 1/2" diameter hole 4 7/8" from the end of the tank, and 2 5/8" from the side of the tank.

SAMPLE REQUIRED

#062811B - HDR: 28 1/2" x 4 3/4" - 12 lbs.

Argo DT-160 solder-on tank set

Top Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and four 5/16" NC threaded nuts for mounting side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 7/8" diameter bypass hose connection, a 1/4" NPT flange for a drain fitting, and four 5/16" NC threaded nuts for mounting side frames.

#062811A - HDR: 20 7/8" x 3 1/2" - 12 lbs.

Terex Rock Crusher solder-on tank set

The top tank has a 2" diameter hose connection and a 1 1/4" diameter hole for a filler neck, and the bottom tank has a 2 1/4" diameter hose connection. Both tanks have a pair of recesses to allow clearance for bolts.

#062711A - HDR: 14 3/4" x 1 1/2" - 6 lbs.

ATV solder-on complete set

Top Tank
This tank has a 7/8" diameter hose connection, a 1 1/8" diameter hole for a fill neck, and an 18mm x 1.5mm threaded sensor fitting.
Bottom Tank
This tank has a 7/8" diameter hose connection, two mounting brackets on the side of the tank opposite the hose connection, and a mounting pin on the bottom.
Side Frames
These frames have a mounting bracket with a rubber grommet, and two mounting ears with 1/4" NC threaded holes.

#062410A - HDR: 25 5/8" x 3 3/4"

Solder-on tank set

The top tank has a 1 3/4" diameter hose connection and a hole for a filler neck, and the bottom tank has a 2 1/2" diameter hose connection.

#062308A - HDR: 21 3/4" x 3 7/8"

Solder-on Tank

This tank has a 1 1/2" diameter hose connection in the upper right corner 2 1/2" long.

#062210B - LGTH: 27 1/8" - HDR: 4 7/8" wd. 1 1/4" dp.

Solder-on side frame

This frame has four 5/16" threaded nuts, and a mounting bracket with two slotted mounting holes.

Front and back views shown here.

#062210A - HDR: 25 3/4" x 4 1/4"

Solder-on tank set

Top Tank
This tank has a 2 1/4" diameter hose connection, a hole for a filler neck, and there's a deflection baffle in the tank.
Bottom Tank
This tank has 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Side Frames
These frames have three 3/8" NC holes along the back, and a bracket on the side.
Shroud (not shown here)
This shroud has a 24" diameter hole for the fan, four 5/16" NC threaded nuts on the face, and two 3/8" NC threaded nuts on the side.

#062110A - HDR: 15 11/16" x 2 7/16"

Solder-on tank set

These tanks have 1 1/4" diameter hose connections and a 1/4" NPT flange. The top tank has a hole for a filler neck, and the bottom tank has has a mounting bracket.
Side frames have two 5/16" NC threaded nuts, and two 1/4" threaded nuts.

#062012A - HDR: 20 7/8" x 5" - 37 lbs

Solder-on complete set

Top and bottom tanks are mirror images of each other. Each tank has a 1 1/4" NPT coupling, and a 3/8" NPT coupling. Made of 1/8" thick steel, and have square corners.

Frames are 51 13/16" in length, by 5 1/4" wide. One frame is blank, and the other has five 5/15" NC mounting nuts along each side.

#061809A - HDR: 23 7/8" x 5"

Complete tank set

Top Tank
This tank has two 2 1/4" diameter hose connections, a bracket with slotted holes for mounting, a 1/4" NPT flange for an expansion fitting, and there is a baffle in the center of the tank between the hose connections.
Bottom Tank
This is a blank tank.
Side Frames
These frames are 42 1/2" long by 5" wide. One channel is plain, and the other has three 5/16" threaded nuts along the back.

Note: original unit was all aluminum construction.

#061610A - HDR: 28 1/8" x 4 3/4"

Solder-on tank set

These tanks have 2 1/4" diameter hose connections, and the top tank has a 1 5/8" diameter hole for a filler neck and a 3/8" NPT flange.

#060909A - Frame - LGTH: 28 1/2"

Solder-on Side Frame

This side frame is 3 5/8" wide and 1" deep. There are five 5/16" NC threaded nuts along the back of the frame, and five 5/16" NC threaded nuts along the edge of the frame.

#060711A - HDR: 16 1/4" x 2 1/2" - 8 lbs.

Mine Cat solder-on tank set

Inlet Tank
This tank has a 1 1/4" diameter hose connection out of the end and on an angle towards the engine, a 1" diameter hose connection straight towards the engine, and a baffle that splits the tank in two.
Outlet Tank
This tank has a 1" diameter hose connection, a 1/4" NPT flange on each end for drain fittings, and a baffle that splits the tank in two.

This is a triple-pass system.

#060309B - HDR: 21 5/8" x 2 1/8"

Solder-on tank set

Top Tank
This tank has a 1 1/2" diameter hose connection, a 1 3/8" diameter hole for a fill neck, and one end of the tank is sloped while the other end has an indent.
Bottom Tank
This tank has a 1 1/4" diameter hose connection that angles towards the ground, and two mounting pins.

#053010A - HDR: 23 1/4" x 4 3/4"

Solder-on tank

This tank has a 2 1/4" diameter hose connection 2 1/2" long, and a 1/4" NPT flange for a drain fitting.

#052909B - HDR: 21" x 3"

Solder-on tank set

Top Tank
This tank has a 1 1/2" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain cock.

#052909A - HDR: 29 3/4" x 5 1/2"

Solder-on tank set

Top Tank
This tank has a 2" diameter hose connection, a 1/2" NPT flange for a sight glass, a threaded block to accommodate a ground wire, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection 5" long, and a 1/4" NPT flange for a drain cock.

#052512A - HDR: 14 3/8" x 2"

Lada solder-on tank set

Top Tank
This tank has a 22mm x 1.5mm threaded hole for a sensor fitting, a 1/4" NPT flange for a drain fitting, a stand pipe to accommodate a foreign style filler neck, and a 1 1/4" diameter hose connection.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a 3/4" diameter bypass hose.

#051607A - HDR: 24 1/2" X 2 7/8"

Solder-on Tank Set

Top Tank

This tank has a 2" diameter hose connection 3 1/4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange to accommodate an expansion tube 5 1/4" from the edge of the tank.

Bottom Tank

This tank has a 2" diameter hose connection 3 1/4" from the edge of the tank to the center of the hose connection, and a 3/8" NPT flange 2 3/8" from the edge of the tank.

Note: kit comes with a 1/4" NPT hose barb and a 3/8" NPT square headed plug.

#051409B - HDR: 22" x 3"

Solder-on Top Tank

This tank has a 1 3/4" diameter hose connection, and a stand pipe for a filler neck.

#051109A - HDR: 29 3/4" x 4 7/8"

Solder-on tank set

Top Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a 1 3/4" diameter hole in the top center of the tank for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange on the grill side.

#050809B - HDR: 31" x 4"

Solder-on tank set

Top Tank
This than has a 3" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 3" diameter hose connection that angles out and up, and a 1/4" NPT flange for a drain cock.

#050809A - HDR: 21 7/8" x 3 7/8"

Solder-on Top Tank

This tank has a 1 1/16" diameter hose connection, a 1/2" NPT flange for a low coolant sensor, a hole in the top center of the tank for a filler neck, and a de-aeration baffle.

#050610A - HDR: 16" x 2 1/2"

Solder-on tank set

These tanks have a 1" diameter hose connection, and the top tank has a hole for a filler neck.

#042910A - HDR: 18 3/4" x 3 1/16"

Solder-on bottom tank

This tank has a 1 1/2" diameter hose connection 2 1/2" long, and a 1/2" NPT flange for a drain fitting.

#042610A - HDR: 28 5/8" x 4 3/8"

Solder-on tank set

These tanks have 2" diameter hose connections 2 1/2" long, and the top tank has a 1" diameter bypass hose and a hole for a filler neck.

#042607A - HDR: 26 1/2" X 4 1/4"

Solder-on Tank Set

Top Tank

This tank has a 1 3/4" diameter hole in the top center of the tank to accommodate a truck filler neck, and a 2" diameter hose connection (3" long) 4" from the edge of the tank to the center of the hose connection.

Bottom Tank

This tank has a 1/4" flange for a drain cock 2 1/2" from the edge of the tank, and a bolt-on style flange with a 2" diameter hole with a pair of 5/16" threaded holes. Flange is located 4" from the edge of the tank to the center of the hole.

#042409A - Frame - LGTH: 18 1/2"

Volkswagon solder-on side frame
This frame has two 1/4" threaded holes, and two mounting pis @ 13 1/4" centers.

#042208A - HDR: 16" x 2 5/8"

Lawn Mower tank set

Top Tank
This tank has a 1" diameter hose connection, four 1/4" NC threaded holes to mount the side frames, and brackets on each end to mount into engine.
Bottom Tank
This tank has a 1" diameter hose connection, four 1/4" threaded holes for mounting the side frames, a PTO cutout in the center, and a 1/4" NPT flange for a drain cock.

#042110A - HDR: 19 3/8" x 2 1/2"

Solder-on bottom tank

This tank has a 1 1/4" diameter hose connection, two mounting holes with 3/8" NC threaded nuts @ 16 3/8" centers, a PTO cutout (original tank did not have this), and a 1/4" NPT flange for a drain fitting.

Front and back view shown here.

#041911A - HDR:8 3/4" x 3 1/4" - 12 lbs.

Crank Box solder-on tank

Blank tank used for crank boxes.

#041510B - HDR: 18 1/8" x 2 1/2" - 10 lbs.

Solder-on tank set

Top Tank
This tank has a 1 1/8" diameter hose connection, two keyhole mounting brackets, a hole for a filler neck, two 1/4" NC threaded holes on the fan side, and two 1/4" NC threaded holes on the grill side.
Bottom Tank
This tank has a 1 1/8" diameter hose connection that bends upward at a 90^o angle, a 1/4" NPT flange for a drain fitting, two mounting studs @ 8" centers, two 1/4" NC threaded holes on the fan side, and two 1/4" NC threaded holes on the grill side.

#041309B - HDR: 19 7/8" x 3 7/8"

Solder-on cross flow tank set

Outlet Tank
This tank has a 1 1/2" diameter hose connection, and a 1 1/4" hole at the end of the tank for a filler neck.
Inlet Tank
This tank has only the 1 1/2" diameter hose connection.

#041008A - HDR: 28 3/8" x 5"

Solder-on Top Tank

This tank has a 1 1/2" hose connection, a 3/8" NPT flange for a sensor, and a 1 3/4" diameter hole on the top center for a fill neck. The inside of the tank contains a deflection baffle.

#040808A - HDR: 36 1/2" x 4"

Solder-on Tank

This tank has a 2 3/8" diameter hose connection 12" from the edge of the tank to the center of the hose connection.

#040610A - HDR: 24" x 3 1/2"

Solder-on tank set

The top tank has a 2" diameter hose connection and a 1 3/4" diameter hole for a filler neck, and the bottom tank has a 2 1/2" diameter hose connection.

#040510C - HDR: 28 1/4" x 4 7/8"

Solder-on tank

This tank has a 2 1/2" diameter hose connection.

#040510B - HDR: 28 1/4" x 6 1/2"

Solder-on tank

This is a basic tank with a 2" diameter hose connection.

#040411A - HDR: 14 5/8" x 6 1/2" - 10 lbs.

Rock Crusher solder-on tank set

These tanks have 2 1/2" diameter hose connections, and two threaded nuts in each corner. The top tank has a 1/2" NPT flange, and the bottom tank has a 1/4" NPT flange.

#033108A - HDR: 32" x 3"

Solder-on Tank

This tank has a 2" diameter hose connection 8" from the edge of the tank to the center of the hose connection, and a 5/8" diameter hole next to the hose connection.

#032911A - HDR: 17 3/4" x 2 1/2" - 10 lbs.

Takeuchi Excavator

Top Tank
This tank has two brackets, two 1/4" threaded nuts on each end, a 1 1/4" diameter hose connection, and a 1 1/8" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, two 1/4" threaded nuts on each end, a PTO cutout, two mounting pins @ 12 1/2" centers, and a 1/4" NPT flange for a drain fitting.

#032910A - HDR" 26 3/4" x 3"

Solder-on tank

This blank tank is similar to tank kit #9503, except longer.

#032610A - HDR: 20 3/4" x 6"

Solder-on top tank

This tank has a 2" diameter hose connection, a 1" diameter bypass connection on a 90^o angle, a deairation baffle, a 1/4" NPT flange, and a 1 3/4" diameter hole in the top center for a filler neck.

#032511A - LNGTH: 29 1/4" - HDR: 4 5/8" x 1" - 8 lbs.

Oldenberg bottom frame

This frame has five 3/8" NC threaded nuts along each edge for attaching a shroud, and three 1/2" NC threaded nuts for mounting.

#032510A - HDR: 19 7/8" x 2"

Solder on tank set

These tanks have a 1 3/8" diameter hose connection, two 1/4" NC threaded holes in the fan side, two 1/4" NC threaded holes on the grill side, and two mounting pins @ 13" centers. The top tank has a hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain.

#032409A - HDR: 18 3/4" x 5 1/4"

Solder-on tank set

Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, and 1 1/16" diameter holes @ 10" centers for an oil cooler.

#031908A - HDR: 25 3/4" x 4 3/8"

Solder-on Bottom Tank

This tank has a 1 1/2" diameter hose connection, and a ten plate oil cooler with 18" centers (1018PC).

#031710A - HDR: 21" x 4 1/8"

Solder-on Bottom tank

This tank has a 2 1/4" diameter hose connection, two holes for an oil cooler, and a 1/8" NPT flange for a drain fitting.

#030911A - HDR: 36 3/4" x 6 3/8" - 85 lbs

Motor Coach solder on complete set

Top Tank
This tank has two 2 1/4" diameter hose connections with a baffle separating them, a 1" NPT flange for a sight glass, a 1/4" NPT flange, and a mounting bracket.
Bottom Tank
This tank has a 1/4" NPT flange for a drain fitting, a 1418PC plate oil cooler (replaces the original aluminum cooler), and a mounting bracket.
Side Frames
These frames have eight 5/16" NC threaded nuts along the back.

Note: side frames have been modified from the original to be welded directly onto the tanks.

#030712A - HDR: 25 3/4" x 4 3/8"

Grader solder-on tank set

Top Tank
This tank has a 2" diameter hose connection, a 1 1/4" diameter hole for a filler neck, a 1/4" NPT flange, and an in-tank baffle.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, and a 1/4" NPT flange for drainage.

#030707A - HDR: 25 3/8" X 4 1/2"

Solder-on Top Tank

This tank has a 3/4" diameter bypass hose connection in the center of the tank, a pair of 1/2" NPT flanges for sight glasses on the right side of the tank, a 2 1/4" diameter hose connection below the baffle on the left side of the tank, a truck fill neck hole in the top center of the tank, and a 1/4" NPT flange between the fill neck hole and the left side of the tank.

#030612A - HDR: 13" x 1 5/8"

Heater Core solder-on tanks

Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 3/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.

#030410A - HDR: 21 1/2" x 3 1/4"

Solder-on bottom tank

This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a PTO hole through the center of the tank.
Note: samples are required to build this tank.

#030310B - HDR: 18 3/8" x 4"

Solder-on tank

This tan has a 1 1/2" diameter hose connection.

#030310A - HDR: 25 7/8" x 4 1/8"

Solder-on tank

This tank has a 1 1/2" diameter hose connection, a 1/8" NPT flange, and a hole in the top center for a filler neck.

#030308A - HDR: 4 1/4" wide

Solder-on side frame

This frame has a bracket long the back with five slotted holes.

#030107A - HDR: 29 1/2" X 4 3/4"

Solder On tank set

Top Tank

This tank has a pair 1 1/2" diameter hose connections (2 1/2" long) 3 3/4" from the edge of the tank to the center of the hose connections, a 1" bypass hose (1 1/2" long) 9 7/8" from the edge of the tank, a pair of 1/4" NPT flanges 9" in from the edge of the tank (above and below each other), and a fill neck hole in the top center of the tank. This tank has a de-airation baffle.

Bottom Tank

This tank has a 2" diameter hose connection (2 1/2" long) 3 1/4" from the edge of the tank to the center of the hose connection, and a 1418PC plate oil cooler (14 plates, 18" centers) running from the other end.

#022410B - HDR: 19 3/4" x 4 1/2"

Solder-on tank set

The top tank has a 1 1/4" diameter stand pipe for a filler neck, and a 1 1/2" diameter hose connection. The bottom tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain. The side frames have three 5/16" NC weld nuts along each edge, and four 5/16" NC threaded nuts on the back.

#022210A - HDR: 18" x 4 1/2"

Solder-on complete tank set

These tanks have 2 1/2" diameter hose connections and a 1/4" NPT flange for expansion/drain fittings. The top tank has a hole for a filler neck and a mounting bracket on the engine side.
The side frames have four 1/4" NC threaded nuts along the edge, four 1/4" NC threaded nuts and four 3/8" NC threaded nuts on the back.

#021711A - HDR: 14" x 1 7/8"

Heater Core complete tank set

These tanks have 3/4" diameter hose connections, and the bottom tank has a 1/4" NPT flange for a drain fitting.

#021010A - HDR: 24" x 3"

Solder-on tank

This tank has a 1 3/4" diameter hose connection, a 1/4" NPT fitting, and a PTO cutout.

#020910A - HDR: 25 3/4" x 4 5/16"

Solder-on tank set

This tanks have 2" diameter hose connections, and the top tank has a 3/8" NPT flange and a 1 3/4" diameter hole for a filler neck.

#020810A - HDR: 19 1/2" x 3"

Solder-on tank

This tank has a 1 1/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a keyhole bracket on the back of the tank for mounting.
Will need sample to manufacture

#020712B - HDR: 32 1/4" x 6 3/8"

Liebherr solder-on tank

This tank has a 2 3/4" diameter hose connection 6" from the edge of the tank to the center of the hose connection.

#020508A - frame - 4 3/4" w.

Solder-on side frame

This side frame is 43 1/8" long, with ten 5/16" threaded nuts along the back of the frame, and two 5/16" threaded nuts along the fan edge, and two along the grill edge.

#020311A - LGTH: 20 1/2" - HDR: 3 5/8" wd. x 3/4" dp. - 4 lbs.

Solder-on side frame

#020310A - HDR: 21 7/8" x 6"

Solder-on tank

This tank has a 1 3/4" diameter hose connection.

#012810B - HDR: 17 3/4" x 5 3/4"

Solder-on tank

The tank is blank with sloping sides except for one corner.

#012508A - HDR: 25 1/4" x 3"

Solder-on complete tank set

Top Tank
This tank has a 2" diameter hose connection, a de-airation baffle, a 1/4" NPT flange on the top of the tank for an expansion tube, a 1 3/8" hole for a filler neck, and a 3/4" diameter bypass connection.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Frames
These side frames are equipped with many various brackets for mounting.

#012408B - HDR: 19 5/8" x 3 1/16"

Solder-on tank

This tank has a 1 3/8" diameter hose connection, a 3/4" bypass pipe, and 3/8" NPT fitting for a drain.

#012408A - HDR: 25 5/8" x 3 3/8"

Solder-on tank

This tank has a 1 3/4" diameter hose connection 2 1/2" from the edge of the tank to the center of the hose connection, two slotted holes for mounting, and a 1/4" NPT flange for a drain cock.

#012009A - HDR: 28 1/4" x 4 3/4"

Solder-on tank

This tank has a 2 1/4" diameter hose connection, a 1/2" NPT flange, a 1/4" NPT flange, and two holes for an oil cooler.

#011907A / #011907B - HDR: 31" X 4 7/16"

Solder-on tank set

Top Tank

This tank has a 2 1/4" diameter hose connection 9 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT fitting to accommodate a vent 11 7/8 from the edge of the tank, and a 1 3/4" filler neck hole on the top center of the tank.

Bottom Tank

This tank has a 2 1/2" hose connection 3" long 6 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the grill side of the tank for a drain cock, and a pair of 1/2" NC @ 2" long mounting bolts at 25" centers.

#011612A - HDR: 14" x 5 1/2"

Tree Harvester solder-on complete set

Top Tank
This tank has a 2" diameter hose connection, a hole for a filler neck, a 1/4" NPT flange, and a 3/4" NPT flange for a sight glass.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange.
Side Frames
These frames have a series of slotted holes along the edges.

#011509B - HDR: 26 1/2" x 4 1/2"

Solder-on tank set

Top Tank
This tank has a 2" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/8" diameter hose connection.

#011310B - HDR: 26 3/4" x 3 7/8"

Solder-on tank set

Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.

#011310A - Dim: 22 1/2" long x 4 1/4" wide

Mine Cat solder-on side frame

This frame has three 5/16" NC threaded holes and a 1/4" NC threaded hole along each edge.
These frames suit tank set #100108A.

#011207A - 6 5/8" w. 27" (between hdrs)

Solder-on side frame

This solder-together side frame has three 3/8" NC nuts along both the grill and fan edges for mounting the shroud/guard.

#011011A - HDR: 13 3/8" x 2 1/8" - 12 lbs.

Lamborghini solder-on tank set

The top tank has a baffle between the pair of 1 3/8" diameter hose connections, two 24mm fittings for sensors, two 1/4" NC threaded holes on each side, a 1/4" NPT flange on the end for an expansion fitting, and a 3/8" NC threaded hole on each end for a drain.
The bottom is just a blank tank with a pair of 1/4" NC threaded holes on each side.

#010907A - HDR: 28 3/8" X 5"

Solder-on tank

This tank has a 1 1/2" diameter hose connection 2" long, which is 5 3/4" from the edge of the tank to the center of the hose connection, and a 1/2" NPT flange 6" in from the other end. It has a 1 5/8" hole on the top center of the tank to accommodate a fill neck.

#010810B - HDR: 20 1/2" x 3 1/4"

Solder-on tank set

Outlet Tank
This tank has a 1 1/8" diameter hose connection, and a stand pipe for a filler neck.
Inlet tank
This tank has a 1 1/8" diameter hose connection, and a 1/4" NPT flange for a drain fitting.

#010810A - Dim: 19 7/8" long x 3 5/8" wide

Solder-on side frames

These frames have three 1/4" NC threaded mounting holes along each edge of the frame, and the bottom frame has two 1/2" NC threaded mounting holes along the back.
Top and bottom frames are identical except for the 1/2" mounting nuts on the bottom frame.

#010709A - HDR: 26 1/2" x 4 1/2"

Solder-on tank set

Top Tank
This tank has a 2 1/4" diameter hose connection, and a 1 3/4" diameter hole for a fill neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection.