Products

Select a product category
32 results found!
  • #7539 - Length: 29" HDR: 7" w. x 6 1/4" dp. - 11BH 

    Bus Side Frame

    The flanges on this frame have three 5/16" NC threaded holes along the back, four 3/8" NC threaded mounting holes on the back of the frame, and three 5/16" NC threaded holes along the edge of the frame for mounting the shroud or finger guard.

    Lefts and rights are not interchangeable - order accordingly.

  • #7531T- Length: 32 1/4" HDR: 7" W x 5 3/4" DP - 6 BH 
    Bus Top Frame

    This frame has eight 3/8" NC threaded holes along each edge of the frame.

    Note:  matches tank #7433, #753, and #754.
  • #7531B - Length: 32 1/4" HDR: 7" W x 6 3/4" DP - 6 BH 

    Bus Btm Frame

    This Bus frame has a length of 32 1/4", with eight 3/8" NC threaded holes along the edge of the frame, and four 1/2" NC threaded holes along the back of the frame.

    Note:  the header bolt pattern matches #7433, #753, #754 tanks.

  • #739 - LGTH: 30" - 14 lbs. Top & Bottom flanges: 6 1/4" w. x 3" dp. 
    Bus Side Frame

    Each end has five holes - 3 tapped 5/16" NC threads and 2 drilled clearance for 5/16" bolts.  There are six 5/16" NC threaded nuts - three on each side of the rail.
    Note:  frames are interchangeable.
  • #738 - LGTH: 30" - 15 lbs. Top & Bottom flanges: 7" w. x 5 1/4" dp. 
    Bus Side Frame

    Each end has nine holes, 3 tapped 5/16" NC  and 6 drilled clearance for 5/16" bolts.  Four 3/8" NC threaded holes on the back of the channel. Four 5/16" NC threaded holes on each side of channel.  Three 3/4" diameter holes in the back.
    Note:  frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
  • #737 - LGTH: 26 1/16" - 12 lbs. Top & Bottom flanges: 6 1/4" w. x 4 1/4" dp. 
    Bus Frame

    This frame is the same as #736, but 2" shorter and has no “Z” bracket.
    Note:   frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
  • #736 - LGTH: 28 1/16" - 14 lbs. Top & Bottom flanges: 6 1/4" w. x 4 1/4" dp. 
    Bus Frame

    Top and bottom flanges each have 8 holes (4 tapped 5/16" NC), an angle bracket on one side with three 3/8" NC threaded holes, three 3/8" NC threaded holes on the other side of channel, four 3/8" NC threaded holes on the back of the channel, and a “Z” shaped bracket on the back with a 1/2" diameter hole through the center.
    Note:  these frames are not interchangeable - order left for driver’s side or right for passenger’s side or pairs.
  • #7351 - LGTH: 30 1/4" - 12 lbs. Top & Bottom flange: 6 1/4" x 4 1/4" dp. 
    Bus Frame

    The top & bottom flange has eight 3/8" diameter bolt holes on each.  On the fan side of the rail there are four 5/16" NC threaded holes, and on the grill side of the rail there are four 5/16" NC threaded holes. On the back of the frame there are four 3/8" NC threaded holes.
  • #735 - LGTH: 33 1/4" - 14 lbs. Top & Bottom flanges: 6 1/4" w. x 4 1/4" dp. 
    Bus Frame

    Top & bottom flanges each have eight 5/16" NC threaded holes. Angles welded to each side of the rail have four 5/16" NC threaded holes. Twelve 3/8" NC threaded holes are on the back of the channel (to suit two different models).
     Note:   frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
  • #7341T - LGTH: 36 1/4" HDR: 7" w. 5 1/4" dp. 
    Bus top frame

    The flanges on this frame are the same as frame #734 with six 3/8" holes and three 5/16" NC threaded holes.  There is an inner channel, sixteen 3/8" NC threaded holes for mounting of various brackets into various positions on the back of the frame, two 5/16" NC threaded holes on the back of the frame, four 5/16" NC threaded holes along the side of the frame for attaching a shroud, and an angle bracket with four 5/16" NC threaded holes for mounting a shroud on the opposite side of the frame.
  • #7341B - Length: 36 1/4" HDR: 7" w. 5 1/4" dp. 
    Bus bottom frame

    This frame has two groups of four bolt pattern with 3/8" NC threaded holes for mounting brackets, an angle bar with four 5/16" NC threaded holes, four 5/16" threaded holes along the edge of the frame opposite where the angle is mounted, and a 9 bolt hole flange with the three center holes tapped to 5/16" NC.
  • #734 - LGTH: 35 3/4" - 18 lbs Top & Bottom flanges: 7" w. x 5 1/4" dp. 
    Bus Side Frames

    Top and bottom flanges each have 9 holes, 6 drilled clearance for 5/16" bolts and 3 tapped 5/16" NC threads. Eight 3/8" NC threaded holes, one group of 4 near the top and one group of 4 near the bottom. Eight 5/16" threaded holes - 4 on each side. Three 3/4" diameter holes in channel.

    Note:  frames are interchangeable.
  • #733 - LGTH: 30" - 15lbs. Top & Bottom Flanges: 6 1/4 w. X 5" dp. 
    Bus Side Frame

    Each end has 8 holes, 4 tapped 5/16" NC and 4 drilled clearance for 5/16" bolts. Four 3/8" NC threaded holes on back of channel. Three 5/16" NC threaded holes on one side and on 5/16" NC threaded hole on the other. Frame works for both left or right.
     Matches tanks #750 & #751.
  • #7316 - Length: 28 3/4" HDR: 7 3/4" w. 4 1/2" dp. 
    Bus Side Frame

    This frame has a length of 28 3/4", and it has eight 3/8" NC threaded holes along each edge - fan and grill side.

    Note:  may have Orion applications.
  • #7315 - Length: 28 3/4" HDR: 7 3/4" w. 4 1/2" dp. 
    Bus Side Frame

    This frame has a length of 28 3/4".  It has an angle bracket on the back of the frame for mounting, four 1/4" NC threaded holes along the edge of the frame, and four 3/8" NC threaded holes and two 1/4" NC threaded holes along the opposite edge of the frame.

    Note:  may have Orion applications.
  • #7313 - LGTH: 31 11/16" - 29 lbs. Top & Bottom flanges: 6 1/2"w. x 7 3/8" dp. 
    Bus Side Frame

    Top & bottom flanges each have 12 bolt holes, four have 5/16" NC threaded holes. The engine side has five 5/16" NC threaded holes. The grille side four 5/16" NC threaded holes. There are 2 brackets.
    Note:  frames are not interchangeable. Order left for driver's side or right for passenger's side or pairs.
    Right side shown here.
  • #7312 - LGTH: 24 11/16" - 18 lbs. Top & Btm flange: 7 3/4"w. x 4 1/2" dp.  
    Eldorado Bus Frame.

    Top & bottom flanges each have 4 bolt holes. There are four 3/8" N.C. nuts on each side. NOTE: Rail matches tank #7423 & #7424
  • #7311 - LGTH: 24 5/8" - 20 lbs. Top & Bottom flanges: 7 3/4" x 4 1/2" dp.   
    Eldorado Bus Frame

    Top & Btm flanges each four 3/8" bolt holes. On each side there are three 3/8" N.C. nuts. One bracket on the back of the frame with a 1/2" holes for mounting.
  • #7310 - LGTH: 27 3/4" - 22 lbs. Top & Bottom Flange: 7 3/4" w x 4 1/2" dp. 
    Ikarus Frame

    Top & bottom flange has 4 bolt holes on each. There are four, 3/8" NC threaded holes on each side of the rail.
  • #7309 - LGTH: 27 11/16" - 24 lbs. Top & Bottom flange: 7 3/4" x 4 1/2" dp. 
    Ikarus Bus Side Frame

    Top & bottom flange has 4 bolt holes each.  On each side of the frame there are five 3/8" threaded holes. One bracket on the back of the frame.
    Note:  frames are not interchangeable. Order left for driver's side or right for passenger's side or pairs.
  • #7306 - LGTH: 28 5/8" - 6 1/2" wide 
    Bus Side Frame

    This frame has three 3/8" NC threaded holes along the edge, four 1/4" NC threaded holes along the edge, four 3/8" NC threaded holes on the back, and five 5/16" NC threaded bolt holes.  This frame comes with an "insert" that acts as an inner channel, and sits on the core side of the frame.

    Note:  these frames are NOT interchangeable - order LEFT or RIGHT
       (RIGHT shown here)
  • #102607A - Length: 31 7/8" HDR: 7 3/4" w. 4 1/2" dp. 
    Bus Side Frame

    This frame has a length of 31 7/8", and has eight 3/8" NC threaded holes along each edge of the frame.
  • #082207B - LGTH: 38" - 25 lbs. - Flange: 6 1/4" w. 7 1/4" dp. 
    Bus Side Frame

    Each flange has 10 bolt holes; four that are threaded @ 5/16" NC,  four 1/4" NC threaded holes and two 1/2" NC nuts on the back of the frame,  and tow 1/4" NC threaded holes along the edge of the frame.  The opposite frame is identical except that it only has one 1/2" NC threaded hole on the back.
  • #082109B - Length: 42" - HDR: 8" wd. 5 1/8" dp. 
    NABI (North American Bus Ind.) bottom frame

    This frame has two 1/2" NC threaded mounting nuts.  There are 11 bolt holes on each end (5 threaded).
  • #072809B - Length: 43 3/4" - HDR: 8 1/2" w. 5" dp. 
    Bus Side Frame

    This frame has twelve 3/8" NC threaded nuts on the back, eight 5/16" NC threaded nuts on the back, and eleven 5/16" NC threaded nuts along each edge.  There are six bolt holes on each end.
  • #062707B - Length: 39 5/16" HDR: 7" X 5 3/8" dp 
    Bus Side Frame

    This frame has four 5/16" NC nuts along the angle on the edge of the frame, four 5/16" NC nuts along the edge on the opposite side, and four 3/8" NC nuts on the back on each end for mounting.
  • #053008A - Length: 31 5/8" HDR: 5 1/4" dp. 7" wd. 
    Bus Side Frame

    This frame has eight 3/8" NC threaded nuts on the back for mounting, eight 5/16" NC threaded holes for mounting the shroud (four to a side), and sleeves for inserting cross bars. There are nine bolt holes on each end for mounting to the header.
  • #051309A - LGTH: 38 3/8" - HDR: 7" w. 5 1/8" dp. 
    Bus Side Frame

    This frame is identical to frame #7307, except that the six bolt holes on each of the headers are slotted.
  • #031909B - Length: 33 1/4" HDR: 6 1/4" w. 4 1/4" dp. 
    Bus Side Frame

    This side frame is 33 1/4" long , it has a channel along each side of the frame with four 5/16" threaded holes, and it has eight 3/8" NC and four 5/16" threaded holes on the back of the frame.
  • #030413C + D - LNGTH: 45 3/8" - HDR: 7" wd. 6 1/4" dp. - 11 BH -31 lbs. 
    Prevost Bus frames

    #030413C -
    Flanges have 8 BH drilled 3/8" and 3 BH threaded 5/16" NC. Each side has six 6mm threaded holes and two 8mm threaded holes. Outer channel has four 8mm threaded holes near the middle, and a 12mm threaded hole at each end. Twp mounting tabs on the side @35 1/4" centers

    #030413D -
    Flanges have 8 BH drilled 3/8" and 3 BH threaded 5/16" NC. Each side has six 6mm threaded holes and two 8mm threaded holes.  Outer channel has four 8mm threaded holes near the middle, and a 12mm threaded hole at each end.  Two 8mm mounting bolts on the side @35 1/4" centers.

    Frames match with tanks #030413A and #030413B.
  • #011807C - LGTH: 35 1/8" - HDR: 8 1/2" wd. x 5 3/8" dp. - 27 lbs. 
    Prevost Bus Frame

    This frame has four 5/16" NC threaded holes along each side of the frame.

    Goes with tank #7432.
    Pairs with frame #011807B.
  • #011807B - LGTH: 35 1/8" - HDR: 8 1/2" wd. x 5 3/8" dp. - 29 lbs. 
    Prevost Bus side frame

    This frame has two 4 bolt flanges with 3/8" NC threaded nuts on the back of the frame for mounting.  There are four 5/16" NC threaded holes along the side for mounting the fan and shroud.

    Goes with tank #7432.
    Pairs with frame #011807C.