Products

Select a product category
17 results found!
  • #9503 - HDR: 16 3/8" x 3 1/4" - 4 lbs. 
    Peterbilt / Kenworth solder-on tank set

    These tanks are identical.  They have 2 1/4" diameter hose connections, and a 1/4" NPT flange for a drain/expansion fitting.  Individual tank #4285.
    Steel version #2706CK.
  • #9502HDR - Blank Brass Header 
    Kenworth blank brass header

    Header size: 38 1/4" x 3 1/2"
  • #9501HDR - Blank Brass Header 
    Kenworth blank brass header

    Header size: 33 1/4" x 3"
  • #9500 - HDR: 29 1/8" x 3" 
    Peterbilt / Kenworth solder-on tank set

    These tanks are identical.  The have 2 1/2" diameter hose connections, mounting brackets on each end, and a 1/4" NPT flange for a drain/expansion fitting.  Individual tank #3033.
    Steel version #2700CK.
  • #2712CK HDR: 41 1/2 x 2 7/8 
    Peterbilt / Kenworth solder-on tank set

    Both of these tanks are identical.  Each has a 2 1/2" diameter hose connection 13 7/8" from the edge of the tank to the center of the hose connection, two mounting bosses on each end to attach side frames, and a 1/4" NPT flange to accommodate a drain cock or expansion fitting.

    This tank set is supplied with eight 5/16" x 4 1/2" bolts with nuts, a 1/4" NPT drain cock, and a 1/4" NPT  90o hose barb.
  • #2711CK - HDR: 34 1/8" x 3 1/2" 
    Kenworth solder-on tank set

    These tanks are identical.  They have 2 1/2" diameter hose connections that angle towards the core, and a 1/4" NPT coupling for a drain/expansion fitting.  Individual tank #4114.
    Brass version #9502.
  • #2710CK - HDR: 33 1/4" x 3" 
    Kenworth solder-on tank set

    These tanks are identical.  They have 2 1/2" diameter hose connections, and a 1/4" NPT coupling for a drain/expansion fitting.
    Brass version #9501.
  • #2709CK - HDR: 39 7/8" x 2 3/4" 
    Kenworth / Peterbilt solder-on tank set

    Top Tank
    This tank has a 2 1/2" diameter hose connection 13" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a vent, and two mounting bosses at each end of the tank.
    Bottom Tank
    This tank has a 2 1/2" diameter hose connection 12 7/8" from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank.

    This set is supplied with eight 5/16" x 4 1/2" bolts with nuts, and a 90o hose barb for the vent.


  • #2708CK - HDR: 39 7/8" x 3 1/8" 
    Kenworth / Peterbilt solder-on tank set

    Top Tank
    This tank has a 2 1/2" diameter hose connection 13" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a vent, and two mounting bosses at each end of the tank.
    Bottom Tank
    This tank has a 2 1/2" diameter hose connection 12 7/8" from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank.

    This set is supplied with eight 5/16" x 4 1/2" bolts with nuts, and a 90o hose barb for the vent.

    Note:  this tank set matches brass kit #9505.
  • #2707CKF - HDR: 22 3/4" x 3" 
    Peterbilt / Kenworth solder-on complete set

    Top Tank

    This tank has a 2 1/2" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a barb fitting, and two mounting pins.
    Bottom Tank
    This tank has a 2 1/2" diameter hose connection 5 3/4" from the edge of the tank to the center of the hose connection and pointing towards the ground, and two mounting pins.
    Side Frames
    These frames are 35 3/4" long, with two indentations with holes in the center.  These frames are interchangeable.
  • #2707CK - HDR: 22 3/4" x 3" 
    Peterbilt / Kenworth solder-on tank set

    Top Tank

    This tank has a 2 1/2" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a barb fitting, and two mounting pins.
    Bottom Tank
    This tank has a 2 1/2" diameter hose connection 5 3/4" from the edge of the tank to the center of the hose connection and pointing towards the ground, and two mounting pins.
  • #2704CK - HDR: 23 3/4" x 2 3/4" 
    Peterbilt solder-on tank set

    Both of these tanks are identical.  Each has a 2 1/2" hose connection 4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange for either a drain cock or a vent.

    This tank set comes with a 1/4" NPT drain cock, and a 1/4" NPT x 3/8" hose barb.
  • #2703CK - HDR: 23 3/4" x 2 3/4" 
    Peterbilt

    Top Tank
    This tank has a 2 1/2" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange to accommodate a barb fitting.
    Bottom Tank
    This tank has a 2 1/2" hose connection 4" from the edge of the tank to the center of the hose connection, and 1/4" NPT flange to accommodate a drain cock.
  • #2701CK - HDR: 25 3/4" x 3" 
    Peterbilt solder-on tank set

    Top and bottom tanks both have 2 1/2" diameter hose connections, the top connection is in the center of the tank, and the bottom connection is 4" from the end of tank to center of the hose connection.  Each has a 1/4" NPT flange for a drain/expansion fitting.
    Similar to brass version #9504 (HDR: 25 3/4" x 3").
  • #110409A-CK - HDR: 31 5/8" x 2 3/4" 
    Peterbilt solder-on tank set

    These tanks are identical to each other.  They have a 2 1/2" diameter hose connection on a 90o angle, four mounting bosses to attach the side frames, and a 1/4" NPT flange for a drain/expansion fitting.
  • #101711A - HDR: 31 5/8" x 2 3/4" 
    Peterbilt solder-on tank set

    These tanks have a 2 1/2" diameter hose connection, four mounting bosses to attach side frames, and a 1/4" NPT flange for a drain/expansion fitting.

    Virtually identical to #110409A, but with a different height of the upper hose connection.
  • #040309A-CK - HDR: 37" x 3" 
    Peterbilt / Kenworth solder-on tank set

    Top Tank
    This tank has a 2 1/2" diameter hose connection 11 1/2" from the end of the tank to the center of the hose connection, four mounting bosses to attach side frames, and a 1/4" NPT flange for an expansion fitting.
    Bottom Tank
    This tank has a 2 1/2" diameter hose connection 11 1/2" from the end of the tank to the center of the hose connection, and four mounting bosses to attach the side frames.

    New 2011 Kenworth 440