15 results found!
#9415 - HDR: 31 3/4" x 2 3/4" 
Volvo White brass kit

These tanks have 2" diameter hose connections and a 1/4" NPT flange for either a drain cock or a 90o hose barb for an expansion tube. Steel version available part #2010CK.
#9303 - HDR: 35 3/4" x 3"  
Volvo solder-on tank kit

These tanks have 2 1/2" diameter hose connections, and the bottom tank has mounting bosses with rubber inserts.
Also available in steel #2401CK-OC
#9302 - HDR: 35 3/4" x 3" 
Volvo / GMC solder-on tank set

Top Tank
This tank has a 2 1/2" diameter hose connection, and 1/4" NPT flange to accommodate a hose barb for venting.
Bottom Tank
This tank has a 2 1/2" hose connection slanting at an angle towards the ground, a 1/4" NPT flange for a drain cock in the center of a "protection bracket", and four mounting bosses to accommodate 5/16" bolts.

Kit comes with a 1/4" NPT drain cock, a 1/4" NPT 90o elbow, and a 1/4" NPT x 3/8" hose barb.

Note:  this kit matches steel kit #2401.
#9301 - HDR: 26 1/4" x 3 1/4" 
Volvo / GM solder-on tank kit

The top tank is a blank tank with a 1/4" NPT flange on each end.  The bottom tank has a 1 1/4" diameter hose connection and a 1" diameter hose connection, and the tank is separated left to right with a baffle.  Individual tanks #3017 (top) and #3016 (btm).   Steel version #2400S
#9300 - HDR:26 1/4" X 3 1/4"   
Volvo / GM solder-on tank kit

These tanks are identical. Both top and btm  2 1/2" diameter hose connections, both 6" from end to center of HC, 1/4" NPT flange on each end.  Individual tank #3015.  Steel version #2400CK.
#2403CK-OC - HDR: 35 1/8 x 2 3/4 

Volvo / GM / Mack solder-on tank set

Top Tank

This tank has a 2 1/2" diameter hose connection, a pair of mounting bosses at each end to attach side frames, four 1/4" NC threaded blocks on the top, four 1/4" NC threaded blocks on the grill side, and a 1/4" NPT flange for an expansion barb.

Bottom Tank

This tank has a 2 1/2" diameter hose connection, a pair of mounting bosses at each end to attach side frames, four 1/4" NC threaded blocks on the grill side, a 22mm flange for a quick fill line, and two holes @ 11 1/2" centers to accommodate an oil cooler.

#2402CK-OC - HDR: 35 1/8" x 2 13/16 

Volvo / GM solder-on tank set

Top Tank

This tank has a 2 1/2" Hose connection (angled upward), a 1/4" NPT flange for an expansion tube, two 5/16" mounting holes to attach side frames, three 5/16" NC threaded blocks to mount the surge tank, and four 1/4" threaded blocks to attach the rubber seal.

Bottom Tank

This tank is the same as the top except the hose connection is at the other end, the flange is for a drain cock, and there are holes @ 11 1/2" centers to accommodate an oil cooler (to be supplied and installed by the customer).

Note:  this set can also be referenced as #082407A.

#2401CK-OC/9303 - HDR: 35 5/8" x 3" 
Volvo / GM solder-on tank set

Top Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange to accommodate a hose barb for venting.
Bottom Tank
This tank has a 2 1/2" diameter hose connection slanting at an angle towards the ground, a 1/4" NPT extended flange for a drain cock, two holes @ 10" centers to accommodate an oil cooler, and four mounting bosses to accommodate 5/16" bolts.

Kit comes with a 1/4" NPT drain cock, a 1/4" NPT 90o elbow, and a 1/4" NPT x 3/8" hose barb.

Note:  this kit matches brass kit #9303.

#2401CK - HDR: 35 5/8" x 3" 
Volvo / GM solder-on tank set

Top Tank
This tank has a 2 1/2" diameter hose connection, and 1/4" NPT flange to accommodate a hose barb for venting.
Bottom Tank
This tank has a 2 1/2" hose connection slanting at an angle towards the ground, a 1/4" NPT flange for a drain cock in the center of a "protection bracket", and four mounting bosses to accommodate 5/16" bolts.

Kit comes with a 1/4" NPT drain cock, a 1/4" NPT 90o elbow, and a 1/4" NPT x 3/8" hose barb.

Note:  this kit matches brass kit #9302.
#091010F - Side Frame 
Volvo solder-on side frame

This frame must be ordered either left or right (not interchangeable).

The left has two 1/4" NC threaded holes, and two mounting studs @ 10 1/4" centers.  The right has three 1/4" NC threaded holes, and two mounting studs @ 13 1/4" centers.
#061810A - HDR: 35 3/16" x 2 3/4" 
Volvo Mack solder-on kit

These tanks have 2 1/2" diameter hose connections, two mounting bosses on each end to attach side frames, and four 1/4" NC threaded blocks on the grill side.  The top tank has four 1/4" NC threaded blocks on the top, and a 1/4" NPT flange for an expansion fitting.  The bottom tank has a 22mm flange for a quick fill line, and two holes @ 11 1/2" centers to accommodate an oil cooler.

Note:  this is the brass version of tank set #2403CK.
#041410A - Surge Tank - DIM: 21 1/2" lg. 7 1/2" wd. 
Volvo Surge tank

This tank is divided into two compartments.

It has a 1 1/4" diameter bypass hose, a 1 3/8" diameter hole for a filler neck (this replaces the screw-on fill cap on the original plastic tank), two 3/8" diameter hose connections, a 3/4" NPT coupling (replaces original sensor fitting), two mounting brackets on each side, a 1/4" NPT flange on the "surge" half of the tank (replaces the screw-on type fitting), and a 1/2" NPT "clean out" hole (designed in to enable to clean out debris caused in the manufacturing process).

Original part# Volvo VN D16 07/09
#021009A - HDR: 32 1/8" x 6 3/4" 
Volvo Loader solder-on tank set

Top Tank
This tank has a 2" diameter hose connection.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.

#011810A - HDR: 27 1/2" x 6 7/8" 
Volvo Loader solder-on tank

This tank has a 2 1/4" diameter hose connection, and a 14mm x 1.5mm flange for a drain assembly.  The cross section of the tank is semi-circular.
#010611C - HDR: 31 1/2" x 3" 
Volvo solder-on tank set

These tanks have a 1/4" NPT flange at each end, and the bottom has a 1" diameter hose connection, a 1 1/4" diameter hose connection, with a baffle separating them.