Profile
Staff
News
Locations
Contact Us
Home
Custom Manufactured Tanks
Selected Brass Tanks
Radiator Truck Parts
Return Policy
Policy Note
Warranty
Placing Orders
Electrical Wiring Inspection
AutoCar Bottom Tanks
AutoCar Misc.
AutoCar Side Frames
AutoCar Top Tanks
Bus Bottom Tanks
Bus Cross Flow Tanks
Bus Frames
Bus Misc.
Bus Top Tanks
Case Tanks and Frames
CAT
Champion Grader
Diamond Rio Bottom Tanks
Diamond Rio Side Frames
Diamond Rio Top Tank
Firetruck Tanks or Sets
Ford Bottom Tanks
Ford Cross Flow Tanks
Ford Frames
Ford Misc.
Ford Top Tanks
Freightliner Bottom Tanks
Freightliner Cross Flow Tanks
Freightliner Misc.
Freightliner Side Frames
Freightliner Surge Tanks
Freightliner Top Tanks
Generator Tanks or Sets
Gillig Bus
GMC Bottom Tanks
GMC Cross Flow Tanks
GMC Frames
GMC Top Tanks
Hovercraft
International Bottom Tanks
International Cross Flow Tanks
International Misc.
International Side Frames
International Top Tanks
John Deere Tanks or Sets
Kenworth Bottom Tanks
Kenworth Misc
Kenworth Side Frames
Kenworth Top Tanks
Komatsu Bolt-on Tanks
Locomotive
Mack Advance Bottom Tanks
Mack Advance Side Frames
Mack Advance Top Tanks
Mack Bottom Tanks
Mack Cross Flow Tanks
Mack Misc
Mack Side Frames
Mack Top Tanks
MCI Bus
Misc. Bolt on Tanks
Motor Home
New Flyer Bus
Nova Bus
Orion Bus
Oshkosh Bottom Tanks
Oshkosh Top Tanks
Ottawa Shunt Truck
PeterBilt Bottom Tanks
PeterBilt Misc.
PeterBilt Side Frames
PeterBilt Top Tanks
Thomas Bus Tanks and Frames
Western Star Bottom Tanks
Western Star Misc.
Western Star Side Frames
Western Star Top Tanks
Woodchipper Bolt-Ons
Bus Completes
CAT
Chevrolet
Core Type Configurations Available
Detroit Diesel
Dodge Ram
Ford
Freightliner
GM
International Cross Flow
ISUZU
Jeep
Kenworth
Lincoln
Mack Radiator
Navistar
Peterbilt
Toyota
TUG
Volvo
.Misc. Coolant Tubes
Freightliner Coolant Tubes
Kenworth Coolant Tubes
Peterbilt Coolant Tubes
Bus Solder-Ons
Caterpillar Solder-Ons
Cummins
Fire Truck Solder-ons
Ford Solder-Ons
Freightliner Solder Ons
Gen Set or Stationary Unit Solder-Ons
GMC Solder Ons
Hino Solder-Ons
Hitachi Solder-Ons
Hyster Lift Truck Solder-Ons
International Solder Ons
Isuzi Solder Ons
JCB Solder-ons
John Deere & Case Solder Ons
Komatsu Solder-ons
Kubota Solder-Ons
Lift Truck Solder-Ons (misc.)
Lincoln Welder
Mack Solder Ons
Misc. Solder On Tanks
Mitsubishi Solder-Ons
Motor Home Solder Ons
New Holland Solder-ons
Nissan Solder ons
PeterBilt/Kenworth Solder Ons
Toyota Solder Ons
Volvo/GMC Solder Ons
Western Star Solder ons
Woodchipper Solder-Ons
Accessories
Boil Out Tanks
Flush Spray Booths
Hoists / Lifts
SandBlasters
Teardown Station
Test Tank C/W Lift
Test Tanks
Antique Restorations
Chemical Shop Supplies
Filler Necks
Gasket Tape
Gloves
Header Clamps
Heater Block
Hydraulic Tanks / Utility Tanks
Oil Coolers
Sightglasses and Flanges
Stackable Bins
Tables and Benches
Tester Kits
Products
Search Our Parts Catalogue
17 results found!
#518LF - HDR: 43 1/4" X 7" - 56 BH - 18 lbs.
Western Star top tank
This tank has a baffle 7/16" from the center of the tank, and two 1/4" NPT fittings on top - 10" in from each end.
Note: pairs with tank #517LF bottom tank ( 4 pass system).
#5162 - HDR: 43 1/4" x 7" - 56 BH - 14 lbs.
Western Star top tank
This tank has a 2 1/4" diameter hose connection on the passenger side, and two 1/4" NPT threaded fittings.
#5161 - HDR: 43 1/4" X 7" - 56 BH - 14 lbs.
Western Star top tank
This tank has a 2 1/2" diameter hose connection coming straight out on the passenger side (10 3/4" in from end), and two 1/4" NPT flanges.
#5153 - HDR: 30 3/8" x 7" - 42 BH
Western Star / Volvo top tank
This tank has a 2 1/2" diameter hose connection on the passenger side, and a 1/4" NPT flange for an expansion fitting.
#5103 - HDR: 37 7/8" x 7" - 50 BH - 16 lbs.
Western Star top tank
This Volvo/Western Star top tank has one 2 1/2" diameter hose connection, and two 1/4" NPT flanges.
#5094 - HDR: 42" x 6 1/2" - 50 BH - 20 lbs
Western Star top tank
This tank has a 2 1/2" hose connection 4 1/2" long 8 1/2" from the edge of the tank the center of the hose connection, and two 1/4" NPT flanges; one on the top of the tank and one facing the engine.
Note: similar to a #5091, but with a longer length and more bolt holes.
#509-1 - HDR: 37 7/8" X 6 5/8" 46 BH - 13 lbs.
Western Star top tank
This tank has a 2 1/2" diameter hose connection on the passenger side (slightly upward), and a 1/4" NPT flange.
#507LF - HDR: 37 7/8"X 6 5/8" - 46 BH - 39 lbs.
Western Star top tank
This low flow tank, comes complete with check valve. It has a 1" diameter hose connection facing down and out to passenger side, two 1/4" NPT flanges a 3/8" NPT flange and a 1/2" NPT flange all facing the engine, and a 1 1/4" hole on top for a filler neck. the top of the tank slopes down to the front.
#5071 - HDR: 37 7/8" x 6 5/8" - 46 BH - 39 lbs.
Western Star top tank
This tank has a 2 1/2" diameter hose connection 6 1/2" in from the end of the tank to the center of the connection, a 1" diameter hose connection facing down and out to passenger side, two 1/4" NPT flanges a 3/8" NPT flange and a1/2" NPT flange all facing the engine, and a 1 1/4" hole on top for a filler neck. the top of the tank slopes down to the front.
#505 - HDR: 43 1/4" X 7" - 56 BH - 51 lbs. (43 1/4" X 12 1/2" - 85 BH overall)
Western Star top tank
This tank has a built-in baffle with twenty-three 5/16" NC threaded holes for the header, a flange in the baffle on the passenger side with four 5/16" threaded holes, two bolt-on type flanges with four 3/8" NC threaded holes in each, a bolt-on type flange on the passenger side with two 3/8" NC threaded holes, two 1/8" one 3/8" and one 1/2" NPT flange facing the engine, and a 1/2" NPT flange on the grill side just below the cut-out for the filler neck.
#504 - HDR: 37 3/4" X 7" - 50 BH - 48 lbs. (37 3/4" X 12 1/2" - 76 BH overall)
Western Star top tank
This tank has two bolt-on type flanges with four 3/8" NC threaded holes in each, a bolt-on type flange on the passenger's side with two 3/8" NPT flanges facing the engine, a bolt-on type flange on the top with two 3/8" NC threaded holes, a 1 1/4" hole on the top for a filler neck, a 1/2" NPT flange facing the grill side, and a bolt-on type flange with four 5/16" NC threaded holes in the baffle on the passenger's side.
#503 - HDR: 30 1/4" X 7" - 42 BH - 38 lbs. (30 1/4" X 12 1/2" - 64 BH overall)
Western Star top tank
This tank has two bolt-on type flanges with four 3/8" NC threaded holes, two 1/8"NPT a 3/8" NPT and a 1/2" NPT flange, a bolt-on flange with two 3/8" NC threaded holes on the top of the tank, a 1 1/4" hole on top for filler neck, a 1/2" NPT flange and one bolt-on type flange with two 3/8" NC threaded holes on the grill side, and a bolt-on type flange with four 5/16" NC threaded holes in the baffle on the passenger's side.
#502 - HDR: 31 1/4" X 10 1/4" - 54 BH - 32 lbs.
Western Star top tank
This tank is the same as tank #501 except that it has
two
2 1/2" diameter hose connections @ 14" centers.
#501 - HDR: 31 1/4" X 10 1/4" 54 BH - 32 lbs.
Western Star top tank
This tank has a 2 1/2" diameter hose connection, a bolt-on type flange on the front and rear of the tank, a 3/8" NPT flange, two 1/4" NPT and two 1/8" NPT flanges, and a bolt-on type flange in the built-in baffle.
Note: filler necks or caps not available.
#500 - HDR: 37 3/4" X 12 3/8" - 52 BH - 49 lbs.
Western Star top tank
This tank has three bolt-on type flange connections, a 1/4" NPT and a 3/8" NPT flange, a 1 1/4" hole on top for the solder on cap, and a bolt-on type flange in the built-in baffle. This tank is similar to tank #499, but with slightly different header dimensions and bolt pattern.
NOTE: filler neck or caps not available.
#499 - HDR: 37 7/8" X 7" - 46 BH - 50 lbs. (Overall 37 7/8" X 12 1/2" - 71 BH)
Western Star top tank
This tank is the same as tank #498, but with out the CAC cut-out and one less 1/4" NPT flange facing the engine.
#498 - HDR: 37 7/8" X 7" - 46 BH - 51 lbs. (Overall 37 7/8" X 12 1/2"- 71 BH)
Western Star top tank
This tank has two bolt-on flanges with four 3/8" NF threaded holes in each, a bolt-on flange with two 3/8" NF threaded holes, two 1/4" NPT and one 3/8" NPT flange facing the engine, a 1 3/4" hole on top for a filler neck, a bolt-on flange in the baffle with four 5/16" NC threaded holes, and nineteen 5/16" NC threaded mounting holes in the baffle. The tank is lower on the passenger side to accommodate a CAC hose.
Taalman, Inc. ©2008 All Rights Reserved.
Privacy Policy