Profile
Staff
News
Locations
Contact Us
Home
Custom Manufactured Tanks
Selected Brass Tanks
Radiator Truck Parts
Return Policy
Policy Note
Warranty
Placing Orders
AutoCar Bottom Tanks
AutoCar Misc.
AutoCar Side Frames
AutoCar Top Tanks
Bus Bottom Tanks
Bus Cross Flow Tanks
Bus Frames
Bus Misc.
Bus Top Tanks
Case Tanks and Frames
CAT
Champion Grader
Diamond Rio Bottom Tanks
Diamond Rio Side Frames
Diamond Rio Top Tank
Firetruck Tanks or Sets
Ford Bottom Tanks
Ford Cross Flow Tanks
Ford Frames
Ford Misc.
Ford Top Tanks
Freightliner Bottom Tanks
Freightliner Cross Flow Tanks
Freightliner Misc.
Freightliner Side Frames
Freightliner Surge Tanks
Freightliner Top Tanks
Generator Tanks or Sets
Gillig Bus
GMC Bottom Tanks
GMC Cross Flow Tanks
GMC Frames
GMC Top Tanks
International Bottom Tanks
International Cross Flow Tanks
International Misc.
International Side Frames
International Top Tanks
John Deere Tanks or Sets
Kenworth Bottom Tanks
Kenworth Misc
Kenworth Side Frames
Kenworth Top Tanks
Mack Advance Bottom Tanks
Mack Advance Side Frames
Mack Advance Top Tanks
Mack Bottom Tanks
Mack Cross Flow Tanks
Mack Misc
Mack Side Frames
Mack Top Tanks
Misc. Bolt on Tanks
Motor Home
New Flyer Bus
Nova Bus
Orion Bus
Oshkosh Bottom Tanks
Oshkosh Top Tanks
Ottawa Shunt Truck
PeterBilt Bottom Tanks
PeterBilt Misc.
PeterBilt Side Frames
PeterBilt Top Tanks
Western Star Bottom Tanks
Western Star Misc.
Western Star Side Frames
Western Star Top Tanks
Woodchipper Bolt-Ons
Chevrolet
Core Type Configurations Available
Detroit Diesel
Dodge Ram
Ford
Freightliner
GM
International 1/2 Core
International Cross Flow
ISUZU
Jeep
Kenworth
Lincoln
Mack Radiator
Navistar
Peterbilt
Toyota
TUG
Volvo
Bus Solder-Ons
Caterpillar Solder-Ons
Cummins
Ford Solder-Ons
Freightliner Solder Ons
Generator Solder-Ons
GMC Solder Ons
Hino Solder-Ons
Hitachi Solder-Ons
Hyster Lift Truck Solder-Ons
International Solder Ons
Isuzi Solder Ons
John Deere & Case Solder Ons
Komatsu Solder-ons
Kubota Solder-Ons
Lincoln Welder
Mack Solder Ons
Misc. Solder On Tanks
Mitsubishi Solder-Ons
New Holland Solder-ons
Nissan Solder ons
PeterBilt/Kenworth Solder Ons
Toyota Solder Ons
Volvo/GMC Solder Ons
Western Star Solder ons
Woodchipper Solder-Ons
Accessories
Boil Out Tanks
Flush Spray Booths
Hoists / Lifts
SandBlasters
Teardown Station
Test Tank C/W Lift
Test Tanks
Chimical Shop Supplies
Filler Necks
Fuel Tanks / Hydraulic Tanks
Gasket Tape
Gloves
Header Clamps
Heater Block
Oil Coolers
Sightglasses and Flanges
Stackable Bins
Tables and Benches
Tester Kits
Products
Search Our Parts Catalogue
17 results found!
#676A - LGTH: 39 3/4" - 24 lbs. Top & Bottom Flanges: 6 3/4" w. X 4 1/2" deep on one side and 8" deep on other.
Mack side frame
Both flanges have 10 holes, 2 tapped 3/8" N.C. and 8 drilled clearance for 3/8" bolts. Two angle brackets on side, with a 5/16" N.C. threaded hole in each. Various other holes for shroud and brackets, etc. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#676-1 - LGTH: 37 1/8" - 22 lbs. Top & Bottom Flange: 6 3/8" w. X 7" dp.
Mack side frame
Top and bottom flanges each have 10 holes, 6 drilled clearance for 5/16" bolts and four tapped 5/16" N.C. Top flange also has a bracket extending the width to 9", with two holes drilled clearance for 5/16" bolts. Frame has three angle brackets, two with 3/4" diameter holes and one with 3/8" diameter hole. Various other holes for shroud, brackets, etc. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#676 - LGTH: 43 3/16" - 23 lbs. Top & Bottom Flanges: 6 1/2" w. X 7" dp.
Mack side frame
Top flange has 10 holes, 6 drilled clearance for 5/16" bolts and 4 tapped 5/16" N.C. threads. Top flange also has a bracket extending the header width to 9", with two more holes drilled clearance for 5/16" bolts. Frame has three angle brackets. Various other holes for brackets, shroud, etc. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#675 - LGTH: 42 1/2" - 15 lbs. Top & Bottom Flanges: 6 1/2" w. X 4 3/4" dp.
Mack side frame
Flanges on both ends have 8 holes, 2 tapped 5/16" N.C. and 6 drilled clearance for 5/16" bolts. Various other holes for shroud, brackets, etc. NOTE: Side frames are interchangeable.
#674 - LGTH: 36 3/4" - 14 lbs. Top & Bottom Flanges: 6 1/2" w. X 4 3/4" dp.
Mack side frame
Flanges on both ends have 8 holes, 2 tapped 5/16" N.C. thread and 6 drilled clearance for 5/16" bolts. Various other holes for shroud, brackets, etc. NOTE: Frames are interchangeable.
#673 - LGTH: 39 1/4" - 14 lbs. Top & Bottom Flanges: 6 1/2" w. X 4 3/4" dp.
Mack side frame
Flanges on both ends have 8 holes, 2 tapped 5/16" N.C. and 6 drilled clearance for 5/16" bolts. Various other holes for shroud, brackets, etc. NOTE: Side frames are interchangeable. 10
#672 - LGTH: 29" - 14 lbs. Top Flange: 6 3/4" w. X 4 1/2" dp. Bottom Flange: 6" w. X 5" dp.
Mack side frame
Top & bottom flange each have 8 holes, 4 tapped 5/16" N.C. and 4 drilled clearance for 5/16" bolts. One bracket on fan side with two 5/16" N.C. threaded holes. Various other holes on sides and back for shroud, brackets, etc. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs. These frames are not interchangeable.
#6719 - LGTH: 38 15/16" HDR: 6 3/8" x 6 3/8" - 10 BH
Mack side frame
These frames have three 5/16" NC threaded holes along the grill side of the frame, and eight 5/16" NC threaded holes along the back of the frame, one mounting bracket on the back of the frame, and an offset header. Order Left or Right as these frames are
not
interchangeable.
Note: these frames match with tank #6626.
#6717 - LGTH: 44" - 20 lbs. Top & Bottom Flanges “L” shaped - 6 1/4" w. X 6" dp. (Old #679D)
Mack side frame
Top & bottom flanges each have 7 holes, 4 tapped 5/16" N.C. threads and 3 drilled clearance for 5/16" bolts. Two sleeves for cross bars welded to gussets. Total of 36 - 5/16" N.C. threaded holes on channel, 5 on engine side, 9 on grille side and 22 on flat side of channel. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#6716 - LGTH: 38 5/8" - 17 lbs. Top & Bottom Flanges “L” shaped - 6 1/4" w. X 6" dp. (Old #679C)
Mack side frame
Top and bottom flanges each have 7 holes, 4 tapped 5/16" N.C. and 3 drilled clearance for 5/16" bolts. Two sleeves for cross bars welded to gussets. Total of 31 - 5/16" N.C. threaded holes on channel, 5 on one side, 6 on other side and 20 on flat side of channel. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#6715 - LGTH: 29" - 15 lbs. Top & Bottom Flanges: 6 1/4" w. X 5 7/8" dp.
Mack side frame
Each flange has 10 holes, 4 tapped 5/16" N.C. threads and 6 drilled clearance for 5/16" bolts. One angle bracket 18 1/2" down from end, with a 3/8" diameter hole. One 5/16" N.C. hole on one side of the channel and five 5/16" N.C. holes on the other. Two 5/16" N.C. holes on back of channel. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#6714 - LGTH: 29 3/8" - 19 lbs. Top & Bottom Flanges: 6 1/4" w. X 10 3/4" dp.
Mack side frame
Each flange has 14 holes, 4 tapped 5/16" N.C. and 10 drilled clearance for 5/16" bolts. Three 5/16" N.C. threaded holes on each side of rail. (On one side they are evenly spaced & one the other side they are grouped close to one end.) Twelve holes on back of channel in 3 groups of 4. Eight of the holes are drilled 11/32" and the other four have a 5/16" N.C. thread. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#6712 - LGTH: 36 7/8" - 17 lbs. (Old #658) Top Flange: 10 1/4" w. X 5 1/8" dp. Bottom Flange: 6" w. X 5 1/8" dp.
Mack side frame
Top flange is “L” shaped with 9 holes (6 holes drilled clearance for 5/16" bolts and 3 holes tapped 5/16" NC threads). Bottom flange has 11 holes (8 drilled clearance for 5/16" bolts and 3 holes tapped 5/16" NC threads). Six 5/16" NC threaded holes on each side. Six 3/8" N.C. threaded holes on the back.
NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#6711 - LGTH: 30 3/8" - 18 lbs. Top & Bottom Flanges: 6 1/4" w. X 6" dp. (Old #679-3038)
Mack side frame
Each flange has 10 holes, four tapped 5/16" N.C. and drilled clearance for 5/16" bolts. One angle bracket with a 3/8" slotted hole 7 3/4" down from end. One angle bracket with a 3/8" hole 10 1/4" from end to centre. Two 5/16" N.C. holes on back of channel. Five 5/16" N.C. holes on one side of channel. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#671 - LGTH: 29" - 17 lbs. Top & Bottom Flanges: 6 3/4" w. X 4 1/2" dp.
Mack side frame
Flanges on both ends have 8 holes (2 tapped 3/8" NC and 6 drilled clearance for 3/8" bolts). Extra bracket on one side with two 5/16" NC threaded holes.
NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#670 - LGTH: 29" - 12 lbs. Top & Bottom Flange: 6" w. X 4 7/8" dp.
Mack side frame
Flanges on both ends have 8 holes, 4 tapped 5/16" N.C. and 4 drilled clearance for 5/16" bolts. Various other holes for shroud, brackets, etc. NOTE: Frames are interchangeable.
#091508A - LGTH: 38 1/8" HDR: 6 1/4" w. 6" dp. - 10 BH
Mack side frame
This side frame is almost identical to frame #6716, with the exception of the full horseshoe flange, and it is 1/2" shorter than #6716.
Taalman, Inc. ©2008 All Rights Reserved.
Privacy Policy
