Profile Staff News Locations Contact Us Home
24 results found!
#612LF - HDR: 32 1/8" X 7 1/4" - 40 BH - 12 lbs. 
Kenworth bottom tank
Optional “low flow” to Taalman’s #610LF. Tanks are identical except the baffle on #612LF splits the radiator left to right ( #610LF baffle splits tank front to back).
#611LF - HDR: 32 1/8" X 7 1/4" - 40 BH - 13 lbs. 
Kenworth bottom tank
Single pass, low flow conversion tank. One flange connection with two 3/8" N.C. threaded studs at 2 5/8" centres. One 3/8" N.P.T. fitting.
#610LF - HDR: 32 1/8" X 7 1/4" - 40 BH - 13 lbs. 
Kenworth bottom tank
One flange on bottom with two 3/8" N.C. threaded studs. One 1" O.D. hose connection on driver’s side bending on a 90 degree angle to passenger’s side. Two 1/2" N.P.T. fittings. One baffle in centre of tank (lengthwise).
#6092 - HDR: 32 1/8" x 7 1/4" - 40 BH - 12 lbs. 
Kenworth bottom tank
One flange, 10 1/2" from the end of the tank to the center of the flange with four 3/8" N.C. bolts.
#609 - HDR: 32 1/8" X 7 1/4" - 40 BH - 12 lbs. 
Kenworth bottom tank
One flange in center of tank with four 3/8" N.C. bolts.
#6082 - HDR: 32 1/8" x 7 3/8" - 40 BH - 15 lbs 
Kenworth bottom tank
This tank has a 2 1/2" diameter hose connection 9 1/2" from the edge of the tank to the center of the hose connection.  This tank is identical to tank #6081, except the hose connection is smaller and angles downward more.

T600 Kenworth
#6081 - HDR: 32 1/8" x 7 3/8" - 15 lbs 
Kenworth bottom tank
This tank has a 3" diameter hose connection on the passenger side, pointing slightly downward on an angle of approximately 10o.  The hose connection is 4" long at the longest edge -  If your tank's hose connection is longer than this, you may need tank #608 - check carefully.
#608 - HDR: 32 1/8" X 7 3/8" - 40 BH - 15 lbs. 
Kenworth bottom tank
This tank has a 3" diameter hose connection on the passenger side that slants slightly downwards at an angle of approximately 10o.  This hose connection is 6" long.  If a shorter hose connection is required, compare your sample with tank #6081, which has a hose connection of only 4" long.
#6072 - HDR: 32 1/8" x 7 3/8" - 40 BH - 15 lbs 
Kenworth bottom tank
This tank has a 2 1/2" hose connection that sweeps upwards towards the engine, and a 1/2" NPT flange on the bottom of the tank centered towards the grill side.

Note:  intended for CAT engine application.
#607 - HDR: 32 1/8" X 7 3/8" - 40 BH - 15 lbs. 
Kenworth bottom tank
Tank steps down on each end to accommodate mounting brackets. One 2 1/4" O.D. hose connection on driver’s side, bent on a 90 degree angle to passenger’s side. One 1/4" N.P.T. fitting on bottom.
#606 - HDR: 32 1/8" X 7 3/8" - 40 BH - 14 lbs. 
Kenworth bottom tank
This “shallow tank” is 1 1/2" deep from end to end. There is a 3" diameter hose connection on the passenger side that angles slightly downward at an angle of approximately 10o.

Note:  before ordering this tank, compare your sample with tank #608, as these tanks are similar in appearance and can be easily mistaken for each other.
#6051 - HDR: 43 1/2" x 7 1/4" - 30 BH 
Kenworth bottom tank
This tank has a bolt on connection in the center of the tank with four 3/8" NC studs,  two 5/8" NF mounting studs at 16" centers, and a shutter flange on the side of the tank.
#605 - HDR: 43 1/2" X 7 1/4" - 40 BH - 41 lbs. 
Kenworth bottom tank
One 3 1/2" O.D. hose connection in centre of tank. Two bolt-on type connections on side of tank with two 7/16" N.C. holes each. One bolt-on type connection on grille side with two 3/8" N.C. holes. Two 5/8" N.F. mounting holes at 16" centres.
#604 - HDR: 43 1/2" X 7 1/2" - 52 BH - 22 lbs. 
Kenworth bottom tank
One flange on bottom with four 3/8" NC threads. Two flanges on side with two 3/8" NC threads in each. Two 5/8" NC threaded mounts at 16" centers. Tank is tapered on ends and is shallow in center between mounts.
#603 - HDR: 32 1/8" X 7 1/4" - 42 BH - 36 lbs. 
Kenworth bottom tank
One bolt-on type flange with two 1/2" NC threaded holes in middle of the tank. Two bolt-on type flanges on the grille side with two 5/16" NC threaded holes in each. Two bolt-on type flanges on the engine side with two 7/16" NC threaded holes in each. Two 5/8" NF threaded mounting holes @ 8" centers.
#6024 - HDR: 43 1/2" x 7 1/2" - 52 BH - 18 lbs 
Kenworth bottom tank
This tank has a 3" diameter hose connection 18" from the edge of the tank to the center of the hose connection.  It is the same as tank #6023, except the hose connection is permanently welded on instead of a bolt-on type.

Note:  this tank shares the bolt pattern with tank #602.
#6023 - HDR: 43 1/2" x 7 1/2" - 52 BH - 18 lbs. 
Kenworth bottom tank
This basic shallow tank has one large bolt-up style flange with four 3/8" NC studs.  The flange is located 18" from edge of the tank to center of the flange.

Note:  the same tank can be ordered with a permanently welded-on hose connection - tank #6024.
#602-1 - HDR: 36" X 7 1/4" - 44 BH - 13 lbs. 
Kenworth bottom tank
This tank has a flange with four bolts with 3/8" NC threads, and a flange on the side of the tank with two bolts with 3/8" NC threads.
#602 - HDR: 43 ½” X 7 ½” - 52 BH - 17 lbs. 
This tank has a flange at the center of the tank with four bolts with 3/8" NC threads, and a flange on the side of the tank with two bolts with 3/8" NC threads.
#601-1 HDR: 36" X 7 3/8" - 46 BH - 20 lbs. 
Kenworth bottom tank
One flange on bottom of tank with four 7/16" N.C. threaded holes. One flange on side with two 5/16" N.C. threaded holes at 2 3/8" centres. Note: Similar to #601 but wider.
#601 - HDR: 32" X 7 1/4" - 42 BH - 23 lbs. 
This tank is the same as tank #600 except there are no bottom mounting holes.  The tank tapers more on ends for bolt clearance for mounting brackets.
#600 - HDR: 32" X 7 1/4" - 42 BH - 23 lbs. 
Kenworth bottom tank
This tank has a flange in the top center of the tank with four 3/8" NC threaded holes, a flange on the side with two 5/16" NC threaded holes, and two 5/8" NF mounting holes @ 8" centers.
#041910A - HDR: 43 1/2" x 7 1/2" - 52 BH 
Kenworth bottom tank
This tank is the same as a #610LF, except stretched to the header size and bolt pattern of a #591 or #602 tank.
#022808A - HDR: 30 5/8" x 7 3/8" - 42 BH 
Kenworth bottom tank
This tank has a flange connection on the top, two 5/8" NC mounting nuts on the top, and two blanked out flange connections on the grill side of the tank.

Note:  for this tank, samples must be supplied by the customer.