22 results found!
#599LF - HDR: 32 1/8" X 7 5/16" - 40 BH - 36 lbs. 
Kenworth top tank

This low flow tank comes complete with check-valve. Top section favors passenger's side and overhangs towards the engine. One 3/4" NPT flange under the overhang on the passenger's side, a 1" NPT flange on the lower section of the tank facing up on the driver's side, three 1/4" NPT flanges, a bracket on the top, and a flange with 6 holes threaded #10-32 on top slope of tank for access to check valve. One hole for filler neck.
#5994 - HDR: 32 1/8" x 7 5/16" - 40 BH - 36 lbs. 
Kenworth top tank

This tank is the same as tank #5992, except that the hose connection is on the passenger side instead of the driver side.
#5993 - HDR: 32 1/8" X 7 5/16" - 40 BH - 36 lbs. 
Kenworth top tank

This tank is the same as tank #5992 except that the 2 1/2" diameter hose connection goes up and towards the center.
#5992 - HDR: 32 1/8" X 7 5/16" - 40 BH - 36 lbs. 
Kenworth top tank

This tank has a 2 1/2" diameter hose connection on the driver’s side straight out towards the engine, three 1/4" NPT flanges, a 3/4" NPT flange on the passenger side facing straight down, a bracket on top, and a hole for a filler neck.
#5991LF - HDR: 32 1/8" X 7 5/16" - 40 BH - 36 lbs.  
Kenworth top tank

Same as tank #599LF, except with a 1" diameter hose connection between the 4th & 5th bolt holes from passenger side (facing engine).
#598 - HDR: 32 1/8" X 7 3/8" - 40 BH - 36 lbs. 
Kenworth top tank

This tank has a 2 1/2" diameter hose connection on the passenger's side, three 1/4" NPT flanges facing the engine, a bracket on top, a hole for filler neck on top front corner, and the driver's side of the tank is cut lower to accommodate an air to air cooler hose.
#597LF - HDR: 32 1/8" x 7 3/8" - 40 BH - 36 lbs. 
Kenworth top tank

This low flow tank comes complete with check valve. One 3/4" NPT flange straight down on passenger's side, a 1" NPT flange on the lower part of the tank facing up on passenger's side, three 1/4" NPT flanges, a bracket on top, a 1 3/4" hole on top for filler neck, and a flange with 6 holes tapped 10-32 on top towards the front for access to check valve.
#596 - HDR: 36 X 7 3/8" - 44 BH - 46 lbs. 
Kenworth top tank

This tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection on the passenger side, three 1/4" NPT flanges, a bracket on top, and a 1 3/4" hole on the front slant part of the tank for a filler neck.
NOTE: Two 3" diameter hose connections are closed when shipped. Desired connection(s) must be opened at time of installation. This can be done by means of a hacksaw.
#595 - HDR: 36" X 7 3/8" - 46 BH - 46 lbs. 
Kenworth top tank

This tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection, three 1/4" NPT flanges, a bolt-on type filler on the slanted part of the top, and a mounting bracket.
NOTE: Two 3" diameter hose connections are closed when shipped. Desired connection(s) must be opened at time of installation. This can be done by means of a hacksaw.
#594LF - HDR: 32 1/8" X 7 5/16" - 40 BH - 42 lbs. 
Kenworth top tank

This low flow top tank comes complete with check valve. The top part of the tank is sloped on the front and on the driver side. There is a 1" NPT flange on the lower section of driver side, a 1" diameter hose connection facing down on the passenger side, three 1/4" NPT flanges facing the engine, a bracket on the top, a flange on the top with six holes threaded 10-32 to access the check valve, and a hole on the front driver side of center for a filler neck.
#593 - HDR: 32 1/8" X 7 1/4" - 42 BH - 47 lbs. 
Kenworth top tank

This tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection, two 1/4" NPT flanges, a mounting bracket, a bolt-on type filler on the slanted part of the top.
NOTE: Two 3" diameter hose connections are closed when shipped. Desired connection(s) must be opened at time of installation. This can be done by means of a hacksaw.
#592 - HDR: 32 1/2" X 7 3/8" - 42 BH - 38 lbs. 
Kenworth top tank

This tank has a 2" diameter hose connection near the center of the tank, a 1" diameter hose connection, two 1/4" NPT flanges, two bolt-on type filler necks ( one on top and one on the slanted front), and two mounting brackets - one on top and one on the bottom.
#5915 - HDR: 43 1/2" x 7 1/2" - 52 BH 
Kenworth top tank same as #5914 except only one 2 1/2" hose connection on driver's side and filler neck hole located on passenger's side. Matches bottom tank #6023
#5914 - HDR: 43 1/2" x 7 1/2" - 52 BH 
Kenworth top tank

This tank is the same as tank #5911, except the hose connections are only 2 1/2" diameter instead of 3" diameter.

Note:  this tank shares the bolt pattern with tank #591 and tank #602.
#5911 - HDR: 43 1/2" x 7 1/2" - 52 BH - 52 lbs 
Kenworth top tank

This tank is the same as tank #591, except the surge tank is only 21" in length, centered on the top of the tank, to allow room for a charged air cooler.


NOTE: PHOTO SHOWS 1 HOSE CONNECTION, THAT IS INCORRECT, IT COMES WITH 2 CLOSED AND CUSTOMER TO OPEN TO SUIT APPLICATION

Bolt pattern matches tank #591 and tank #602.
#591 - HDR: 43 1/2" X 7 1/2" - 52 BH - 52 lbs. 
Kenworth top tank

This tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection on the passenger side, three 1/4" NPT flanges, a bracket in the center facing the engine with a clearance hole for a 1/2" bolt, and a 1 3/4" hole on top for a filler neck.
Note: Two 3" O.D. hose connections are closed when shipped. Desired connection(s) must be opened at time of installation. this can be done by means of a hacksaw.
#5902 - HDR: 43 1/2" x 8 1/8" - 40 BH 
Kenworth top tank

This tank is the same as tank #590, except the surge tank has been shortened to accommodate a charged air cooler.
#590 - HDR: 43 1/2" X 8 1/8" - 40 BH - 65 lbs. 
Kenworth top tank

This tank has two 3" diameter hose connections @ 16" centers, a 1" diameter hose connection, three 1/4" NPT flanges, 1 3/4 hole on top for filler neck,  a bracket at the center facing the engine.

Note: the 3" diameter hose connections are closed when shipped. The desired connection must be opened before installation (this can be done with a hacksaw).

Note: photo illustrated the 1" hose connection is actually on left side of the passenger hose connection not as shown
#589 - HDR: 32 1/8" x 7 5/16" - 40 BH - 42 lbs. 
Kenworth top tank

This tank has two 3" diameter hose connections facing straight out towards the engine, a 1" diameter hose connection on the passenger side angled down towards the engine, three 1/4" NPT flanges, a bracket on top, a hole on top for filler neck toward driver side of center, and the top of the tank slopes down on front & driver's side.
Note:  the two 3" diameter hose connections are closed when shipped. Desired connection(s) must be opened at time of installation. This can be done by means of a hacksaw.
#123008A - HDR: 30 3/4" x 6 3/8" - 42 BH 
Kenworth top tank

This tank has a 2" diameter hose connection that comes out and down on a 45o angle, a filler neck pipe in the top of the tank, a bracket that surrounds the filler neck, and a mounting ear.
#041910B - HDR: 43 1/2" x 7 1/2" - 52 BH 
Kenworth top tank

This tank is the top of a #594LF, with the header of a #591 or #602 tank.
#012208A - HDR: 32 1/8" x 7 3/8" - 40 BH 
Kenworth top tank

This tank has a 1/4" NPT flange at one end for an expansion pipe, and a 1" NPT fitting on top of the tank for a fast fill line.