17 results found!
#6560 - LGTH: 29 1/2" - 20 lbs. - Flange: 6 1/4" w. 6 1/2" dp. 
International cross flow frame
This frame has five 5/16" NC threaded holes along the fan and grill side for fan guard mounting, and six 3/8" NC threaded holes along the back of the frame for mounting the radiator.  Each flange has 10 bolt holes.

Note:  this frame matches tank #6408 and tank #6409.
#6559 - LGTH: 42 3/4" - 30 lbs. - Flange: 6" w. 7 1/2" dp. 
International side frame

This frame has a large mounting bracket on the back of the frame slightly off center, four 3/8" NC threaded holes on each side of the frame, and four 5/16" NC threaded studs along the side of the frame.

Note:  this frame matches tank #6471 and tank #6472.
#6558 - LGTH: 42 5/8" - 25 lbs. Flanges: 6" w. x 7 3/8" dp. 
International side frame
Bottom rail. Flange has 13 bolt holes. There are two mounting brackets 27" center to center. Six 5/16" N.C. mounting studs.
#6557 - LGTH: 42 3/4" - 22 lbs. Flanges: 6" x 7 3/8" dp. 
International side frame
Top frame has ten 5/16" studs. NOTE: Goes with tank #648LF
#6554 - LGTH: 37 5/8" - 27 lbs. Flange: 6 1/8"w. x 5 1/8" dp. 
International bottom frame
Cross flow bottom frame. Both flanges have 10 bolt holes, four drilled and tapped 5/16" N.C., six drilled 3/8" O.D. for 5/16" bolts. Two 5/16" studs on the fan side and two 5/16" studs on grill side. Two keyhole style brackets on back of the frame for mounting.
#6553 - LGTH: 37 5/8" - 20 lbs. Flanges: 6 1/8" w. x 5 1/8" dp. 
International side frame
Cross flow top frame. Flange has 10 holes, four drilled & tapped 5/16". Two 5/16" studs on the grill side of the frame. Six 5/16" studs on back side of the frame. NOTE: Goes with tank #6491 & #6492.
#6551 - LGTH: 32 7/8" - 25 lbs. Flange: 6"w. x 6 3/8" dp. 
International side frame
Cross flow bottom frame. Four 5/16" N.C. threaded studs on grill side. Four 5/16" N.C. threaded holes on fan side. Two mounting brackets on the back of the frame at 18" centers, 5 1/2" high. Clearance hole for bolts on each bracket.
#6550 - LGTH: 32 7/8" - 28 lbs. Flanges: 6"w. x 6 3/8" dp. 
International side frame
This cross flow top frame has ten holes in each flange - two threaded @ 5/16" NC.   There are seven 5/16" NC threaded studs and two angle brackets with 3/8" holes on the back of the frame, four 5/16" NC threaded studs on grill side, and four 5/16" NC threaded holes on shroud side.

Note:  this frame pairs with frame #6551, as well as tanks #643C, #643-2LF, and #643-3LF.
#654T - LGTH: 39 3/4" - 30 lbs. Flanges: 6 3/4" w. X 6 1/2" dp. 
International side frame
Cross flow top frame. Both flanges step down 1/4" at gussets. Both flanges have 10 holes, 4 tapped 5/16" N.C. and 6 drilled clearance for 5/16" bolts. Frame has a total of 25 holes for brackets and shroud, etc., 21 holes tapped 5/16" N.C. and 4 holes are drilled clearance for 3/8".
#654B - LGTH: 39 3/4" - 29 lbs. Flanges: 6 3/4" w. X 6 1/2" dp. 
International cross flow bottom frame
Both flanges step down 1/4" at gussets. Both flanges have 10 holes, 4 tapped 5/16" NC and 6 drilled clearance for 5/16" bolts. Channel is cut-out in center to accommodate bolts on mounting bracket. Frame has a total of 31 holes all tapped 5/16" NC for brackets and shroud, etc. for mounting bracket.
#6541T - LGTH: 39 3/4" - 22 lbs. Flanges: 6 3/4" w. x 6 1/2" dp. 
International Frame
Cross flow top frame. Frame is similar to #654T except the header is offset.
#6541B - LGTH:39 3/4" - 22 lbs. Flanges: 6 3/4"x6 1/2" dp. 
International frame
Cross flow bottom frame. Frame is similar to #654B except the header is offset.
#653 - LGTH: 37 1/8" - 26 lbs. Top Flange: 11" w. X 5 1/2" dp. Bottom Flange: 7" w. X 5" dp.  
International side frame
Top flange is “L” shaped with 10 holes drilled clearance for 5/16" bolts. Top flange also has 1/8" step on overhang. Bottom flange has 11 holes drilled clearance for 5/16" bolts. One bracket on side of frame with a 1-1/16" diameter hole. Various other holes for brackets, shroud, etc. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#652 - LGTH: 39 1/2" (39 3/4" overall) - 20 lbs. Top: 6" w. (11 3/8" overall) X 6 1/2" dp. Bottom: 6" w. X 6 1/2" dp.  
International side frame
Top and bottom flanges have 6 holes each, all drilled clearance for 5/16" bolts. Top of frame has offset bracket with 5 header holes drilled clearance for 5/16" bolts. Sides of frame have five 5/16" N.C. threaded studs, three facing engine and two facing grille. One angle bracket on back with 1 1/16" diameter hole. Two sleeves welded on gussets to accommodate cross bars. Various other holes for brackets, mounting, etc.

 Note:  frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs. (right shown here)
#651 - LGTH: 30 1/8" - 18 lbs. Small end: 6 3/4" w. X 4 1/8" dp. Large end: “L” shaped - 10 1/2" w. X 4 7/8" dp.  
International side frame
Small end has 8 holes, 4 tapped 5/16" and 4 drilled clearance 5/16" bolts. Large end has 9 holes, 6 taped 5/16" and 3 drilled clearance for 5/16" bolts. Two mounting angles on back of frame, one has 5 holes with 5/16" N.C. threads, the other has 4 holes drilled clearance for 3/8" bolts. Various other holes for brackets, etc. NOTE: Frames are not interchangeable. Order left for driver’s side or right for passenger’s side or pairs.
#650 - LGTH: 41" - 27 lbs. Top Flange: 9 1/2" w. X 7 1/2" dp. Bottom Flange: 8 1/4" w. X 7 1/2" dp.  
Top and bottom flanges have 11 holes each, all drilled to clear 5/16" bolts. One bracket on back of side frame channel. Various other holes for brackets, shrouds, etc.

 Note:  frames are interchangeable.
#111110D - LNGTH: 31" - HDR: 6 1/8" wd. x 4 1/2" dp. 
International side frame
This frame has seven 3/8" NC threaded holes on the back, six 1/4" NC threaded holes along each edge, and a mounting bracket on the back.