Taalman - Products

Products

19 results found!

#6492 - HDR: 27 1/2" X 6 1/8" - 38 BH - 12 lbs.

International cross flow tank
This tank has a 2 1/2" diameter hose connection 8 1/4" from the end, coming out on approximately a 60 degree angle and turned on approximately a 30 degree angle. There is a 1/4" NPT flange on each end.

#6491 - HDR: 27 1/2" x 6 1/8" - 38 BH - 12 lbs.

International cross flow tank
This tank has a 2 1/2" diameter hose connection, 6-1/4" in from end, coming out on approximately a 45 degree angle and turned on approximately a 30 degree angle. There is one 1/4" NPT flange on the opposite end.

#648LF - HDR: 31 1/4" X 6" - 42 BH - 10 lbs

International cross flow tank
This passenger side tank has a 1" diameter hose connection near the top and a 1-1/4" diameter hose connection near the bottom. A baffle divides the tank width-wise at the center, and there is a 1/4" NPT flange in each end. Two corners of the header are cut on 45 degree angle.

#647LF - HDR: 31 1/4" X 6" - 42 BH - 9 lbs.

International cross flow tank
This driver’s side blank tank has a 1/4" NPT flange on each end. The tank is 1 1/2" deep and the header corners on grille side are cut on a 45 degree angle.

#6472 - HDR: 31 1/4" X 6" - 42 BH - 9 lbs.

International cross flow tank
This tank has a 2 1/2" diameter hose connection, 9" in from the end of the tank straight out towards the engine. There is a 1/4" NPT flange on each end. This tank is only 1 1/2" deep, and has two corners of the header cut on a 45 degree angle.

#6471 - HDR: 31 1/4" X 6" - 42 BH - 9 lbs.

International cross flow tank
This tank has a 2 1/2" diameter hose connection 6" in from the end of the tank straight out towards the engine. There is a 1/4" NPT flange on each end. The tank is only 1 1/2" deep, and has two corners of the header cut on 45 degree angle.

#643C - HDR: 30 3/4" X 6" - 40 BH - 12 lbs.

International cross flow tank
This tank has a 2 1/2" diameter hose connection facing the engine, two 1/4" NPT flanges - one on rise of tank and one at the shallow end of the tank.

Note: this tank is the mirror image of tank #643 ( 2 1/2" hose connection on other side) with one more fitting at end.

#643-3LF - HDR: 30 3/4" X 6" - 40 BH - 9 lbs.

International cross flow tank
This basic blank tank has 1/4" NPT flange on the shallow side of the tank.

Note: matches tank #643-2LF

#6432LF - HDR: 30 3/4" X 6" - 40 BH - 10 lbs.

International cross flow tank
This tank has a 1 1/4" diameter hose connection straight out towards the engine, a 1" diameter hose connection on a 90^o angle facing the engine, a baffle in the tank approx. 1/2" off center that splits the tank left to right, and a 1/4" NPT flange on the shallow end of the tank.

Note: this tank is a mirror image of tank #643LF

#6410 - HDR: 25 1/4" x 6 3/8" - 36 BH - 13 lbs.

International cross flow tank
This tank has a 2 1/2" diameter hose connection that bends at 90^o, and a 1/2" NPT flange on end of the tank.

#6409 - HDR: 25 1/4" X 6 3/8" - 36 BH - 12 lbs.

International cross flow tank
This tank has a 2 1/2" diameter hose connection straight out to the engine 10 3/8" in from end to center, and one 1/4" NPT coupling welded in end of tank on approximately a 45^o angle.

#6408 - HDR: 25 1/4" X 6 3/8" - 36 BH - 13 lbs.

International cross flow tank
This tank has a 2 1/2" diameter hose connection that bends @ 90^o and angles slightly upwards, and a 1/4" NPT flange on the end.

#638LF - HDR: 32 1/4" X 6 3/4" - 38 BH - 16 lbs.

International cross flow tank
Low flow tank - mate to #637LF. Tank has no fittings or hose connections.

#6381 - HDR: 32 1/4" x 6 3/4" - 38 BH - 25 lbs

International cross flow tank
This tank has a 2 1/2" diameter hose connection with a 45^o elbow that points upward, and a 7 plate oil cooler with fittings at 18" centers (718PC).

Note: this tank is identical to tank #638, except for the oil cooler.

#638 - HDR: 32 1/4" X 6 3/4" - 38 BH - 16 lbs.

International cross flow tank
This tank has a 2 1/2" diameter hose connection with a 45^o elbow that points upwards.

Note: if you need this tank with an oil cooler, order tank #6381.

#637LF - HDR: 32 1/4" X 6 3/4" - 38 BH - 16 lbs.

International cross flow tank
This low flow tank has a baffle in the center that splits the tank between the two hose connections - one hose connection is 1" diameter and the other hose connection is 1 1/4" diameter, and there is a 3/8" NPT flange on each end of the tank.

#6372 - HDR: 32 14/” X 6 3/4" - 38 BH - 13 lbs.

International cross flow tank
This tank has a 2 3/4" diameter hose connection 10 1/2" in from end, and two 3/8" NPT fittings (one on each end).

Note: this tank is the same as tank #637, but with cutouts on each end to accommodate a charged air cooler (CAC).

#6371 - HDR: 32 1/4" x 6 3/4" - 38 BH - 25 lbs.

International cross flow tank
This tank has a 2 3/4" diameter hose connection that bends 90^o on approximately a 45^o angle, a 3/8" NPT flange on each end of the tank, and a 7 plate oil cooler with 18" centers (718PC).

Note: this tank is the same as tank #637, except for the oil cooler.

#637 - HDR: 32 1/4" X 6 3/4" - 38 BH - 17 lbs.

International cross flow tank
This tank has a 2 3/4" diameter hose connection that bends 90^o on approximately a 45^o angle, a 3/8" NPT flange on each end of the tank.