Products

Select a product category
2 results found!
  • #756 - Side Frame - Length 32 3/4" - 22 lbs. Top & Bottom Flanges: 7" w. X 6" dp. “Offset hdrs”  
    GMC frame

    Top flange has an overhang on engine side to a 12 1/2" overall header size. Top flange has a total of 14 holes, 9 drilled clearance for 5/16" bolts and 5 tapped 5/16" N.C. threads. Bottom flange has 11 holes, 6 drilled clearance for 5/16" bolts and 5 tapped 5/16" N.C. threads. One bracket at top of frame with a 7/16" diameter hole. Two “sleeves” welded on gussets on engine side to accommodate cross bars. Eight 5/16" N.C. threaded holes on sides of rail, 5 on engine side and 3 on grille side. Twelve 3/8" threaded holes on “flat” side of rail.

    Note:  side frames are not interchangeable.
        (left side shown here.)
  • #7551 - Brigadier Bottom Frame Length: 43 1/2" - 28 lbs.  
    GMC frames

    One end is 7 1/8" wide with four 3/8" diameter holes on each side. The other end is 6 1/2" wide, also with four 3/8" diameter holes on each side. (4 holes on each side to accommodate more than one model) Two 1/2" NC mounting studs at 37 7/8" centers. One side of the frame has a bracket with six 5/16" NC threaded holes. The other side of the frame also has six 5/16" NC threaded holes plus a 5/16" NC threaded stud in the center.