4 results found!
#759 - HDR: 31 1/4" X 10 3/8" - 46 BH - 36 lbs 
GMC top tank

This tank has a bolt-on type flange in the baffle with two 3/8" NC threaded holes, two bolt-on type flanges with two 3/8" NC threaded holes, two 1/2" NPT fittings (on each end) and one 5/8" OD hose connection on passenger side, and a 1 3/4" hole on the top for a filler neck.  There is a flange on the front with two 3/8" NC threaded holes.
#758LF - HDR: 45 1/4" X 7" - 60 BH - 52 lbs. (45 1/4" X 12 1/2" - 72 BH overall) 
GMC top tank

This low flow top tank comes complete with check valve. There are twenty five 5/16" NC threaded holes in the built in baffle, a 1" diameter hose connection straight down from the baffle on passenger side, two 1/2" NPT and one 1/8" NPT flange facing the engine, a bolt-on type flange on top of the tank to access the check valve. The top front corners of the tank are cut lower and there are two rounded cut-outs across top of tank, and a 1 1/4" diameter hole for filler neck on top passenger side corner.
#758 - HDR - 45 1/4" X 7" - 60 BH - 56 lbs. (45 1/4" X 12 1/2" - 72 BH overall) 
GMC top tank

This tank has twenty-five 5/16" NC threaded holes in the built-in baffle, a 1" diameter hose connection straight down from the baffle on the passenger side, two bolt-on type flanges with two 3/8" NC threaded holes in each, and two 1/2" a 3/8" and a 1/4" NPT flange.  The top front corners of the tank are cut lower, and there are two cut-outs across the top of the tank. There is a 1 1/4" hole for a filler neck on the sloped cut-out on the passenger side.

Note :   Bolt-on hose connection(s) and/or flat plate(s) available for this tank - must be requested. #7581 - Blank plate #7582 - Plate with 2 1/4" hose connection, 2 1/2" long
#071607A - HDR: 30" X 10 1/8" - 61 BH 

GMC Brigadier top tank

This tank has a 3" diameter hose connection, a 1 " bypass hose, a pair of 1/2" NPT flanges for sight glasses ect., a 1/4" NPT flange for a sensor, a deairation fitting same as Ford style, and a 1 3/8" diameter hole for a fill neck.

sample/dwgs need to be provided