Products

Select a product category
6 results found!
  • #465 - 21 1/2" x 10 1/2" x 5 1/2" 
    Freightliner Classic - 2004 and up

    This tank is similar to #462 with the following exceptions:

    The filler neck is slightly raised, and the brackets are of a different configuration for a different mounting position in the engine compartment - the brackets on the #465 are simple flat brackets with two clearance holes on each.
  • #463 - Surge Tank - DIM: 21 1/2" x 10 1/2" x 5 1/2" 

    Freightliner surge tank

    The filler neck is slightly raised, and the brackets are of a different configuration and mounting position in the engine compartment.  The 1" bypass hose is closer to the back left of the tank as opposed to the front right of the tank.

  • #462 - 21 1/2" X 10 1/2" X 5 1/2" - 20 lbs. 
    Freightliner surge tank

    This surge tank has two 3/8" diameter hose connections near the top, a 1" diameter hose connection out of the bottom below the filler neck, a 3/8" NPT flange, and brackets on each end to bolt to the top frame of the radiator (Taalman #472).  The brackets on each end have a total of 7 holes, two 7/16" diameter, three 1/2" diameter, and two 1 1/16: diameter.
  • #4612 9 1/4"x17 3/4"x4 3/4" - 18 lbsĀ  
    Freightliner surge tank

    Surge tank has one 1"NPT fitting, one 3/8" NPT fitting and seven 1/4" NPT fittings. There is one stand for a filler neck.
  • #461 -8 3/8" x 17 3/4" x 3 1/2" - 15 lbs. 
    Freightliner surge tank

    Has four 1/8" N.P.T. fittings, two 1/4" N.P.T. fittings, one 3/8" fitting, on 1" N.P.T. fitting. One hole on top for filler neck.

    Note:  this surge tank is the same as tank #5129, except for a different arrangement of fittings and location of the fill neck hole.  Check carefully before ordering.
  • #4555 Freightliner Surge Tank 
    Freightliner Surge tank for MT45/MT55


    Filler neck and sight glass not included