Taalman - Products

Products

12 results found!

#121709A - Utility Tank - 30 1/2" x 18 1/4" x 26"

Utility Tank

This tank has a step cut out on the top, and a 1/2" NPT fitting for drainage in the bottom center of the tank.

#092208A - Hydraulic Tank

Hydraulic Tank

This hydraulic tank has two 1/2" NPT flanges for sight glasses, two 3/4" flanges for hydraulic fittings, a 1" NPT flange for a hydraulic fitting, a 1 1/4" NPT flange for a hydraulic fitting, a fill pipe, an access cover plate, an access hole with threaded nuts, a 3/4" NPT flange for a drain, four feet with slotted holes for mounting (two feet are inset from the others), a 1 1/4" NPT flange for an oil filter to screw into, and a baffle inside the tank to reduce sloshing.

#090211A - DIM: 39" x 27 1/2" x 10 1/2"

Paver utility tank

This tank has two sending units, a 5 1/2" wide channel through the middle, and a filler neck.

#082310B - Reservoir Tank

Generic Hydraulic Reservoir Tank

This tank has five 2" NPT couplings, and six 1/2" NPT couplings.

#080910A - Utility Tank

Utility Tank

Overall dimensions: 24 1/2" x 18" x 11"

One 3/4" NPT flange, one 1/8" NPT flange, and a filler neck.

#072407A - Utility Tank - 12" x 14" x 24"

Utility Tank

This tank has a 2" NPT threaded nipple for the filler, a 5 bolt flange for the sending unit, a block with a 1/8" NPT threaded hole and a 1/4" NPT threaded hole, and a 1/2" NPT drain fitting on the bottom.

#061207A - Utility Tank - 21" x 40 1/2" x 14 1/4"

Utility Tank

This tank has a 2" NPT nipple on the side of a filler neck, a 1/4" NPT fitting surrounded by a protection bracket for a sensor, a 5 bolt flange for a sending unit, two 1/2" NPT fittings, and two 3/8" NPT fittings for drains on the opposite side of the tank to the other fittings.

#052711A - Utility Tank - 21" x 16" x 14"

Utility Tank

This tank has four mounting ears on the bottom, a 1/2" NPT flange on the top, a 3/4" NPT flange on the bottom, and a filler neck on the top.

#043007A - Utility Tank - 23" x 31" x 15 1/2"

Utility Tank

This tank has a 4 1/2" diameter hole on top with six 5/16" threaded holes, a 5" x 3 1/2" wide hole in the center of the rectangular bolt flange with 1/4" NC threaded holes, two mounting brackets on the bottom of the tank offset to one side for mounting the tank in place, and a drain pan with a 1/2" NPT fitting.

#042707A - Hydaulic Tank - 8" x 23 7/8" x 13 1/2"

Hydraulic Tank

This hydraulic tank has a 1/2" NPT fitting on the bottom of the tank for a drain, two 1/2" NPT fittings on the front of the tank, a 3/4" NPT fitting on the front of the tank, a 1 1/4" NPT nipple on the front of the tank, a bolt-on flange on the top of the tank with ten 5/16" NC threaded studs, and two mounting feet on each side - each with two 3/8" diameter holes for bolting down.

#031111A - Utility Tank - 110 lbs.

Coach Bus utility tank

This tank has dimensions of 36 1/2" x 33 1/2" x 20 3/4".

#030608A - Utility Tank - 25" x 33" x 16"

Utility Tank

This tank has a 1/2" NPT drain fitting on the bottom of the tank, and four tabs to mount into the frame.