|
|
|
|
|
|
|
|
|
#092011B - HDR: 21 3/8" x 2 7/8"
|
|
Forklift solder-on tank set
Intlet Tank
This tank has a 1 3/4" diameter hose connection, holes @15 1/4" centers for an oil cooler, a stand pipe for a filler neck (#1005), a mounting bracket, two clips, and three 5/16" NC threaded nuts to attach side frames.
Outlet Tank
This tank has a 1 3/4" diameter hose connection, holes @8" centers for an oil cooler, a mounting bracket, two clips, a 1/4" NPT flange for a drain fitting, and two 5/16" NC threaded nuts to attach side frames.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#050107B - HDR: 18" X 1 3/4"
|
|
Lift Truck tank set
Top Tank
This tank has a 1" diameter hose connection 2 5/8" from the edge of
the tank to the center of the hose connection, a 1" diameter hole in the
top center of the tank to accommodate a foreign style filler neck, a
keyhole style bracket on each end of the tank, and a pair of 1/4" NC
nuts on the fan side of the tank.
Bottom Tank
This tank has two pins @ 7 7/8" centers for mounting, four 1/4" NC
nuts (two on the fan side and two on the grill side), and a 1" diameter
hose connection 2 7/8" from the edge of the tank to the center of the
hose connection (connection angles up on a 90o angle, then points towards the passenger side on a 45o angle).
|
|
|
|
|
#050107A - HDR: 20 1/2" X 2 1/4"
|
|
Lift Truck solder-on bottom tank
This tank has a 1 3/8" diameter hose connection 1 3/4" from the edge
of the tank to the center of the hose connection, and an oil cooler
measuring 11 1/2" from center to center (original oil cooler measured
15" center to center).
Note: this tank was made deeper to accommodate the different style oil cooler.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
