Products

Select a product category
5 results found!
  • #091708P - HDR: 25 3/4" x 2 1/8" 
    Hino tank set

    Top Tank
    This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a 90o hose barb, an 18mm flange for a sensor, a bracket on either end for attaching the side frames, and a hole in the top center for a hose connection.
    Bottom Tank
    This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a drain on the grill side, two mounting blocks, and a bracket on either end for mounting the side frames.
  • #080307A - HDR: 25 3/4" x 2 1/4" 
    Hino solder-on set

    Top Tank
    This tank has a hole in the center of the tank to accommodate a GM filler neck, a 2 1/4" diameter hose connection, an 18mm fitting, and mounting brackets on each end of the tank with a pair of 5/16" NC threaded holes in each for attaching side frames.
    Bottom Tank
    This tank as a 2 1/4" hose connection, a 1/4" NPT flange for a drain cock, and mounting brackets on each end with a pair of 5/16" NC threaded holes for attaching side frames.
  • #070709A - HDR: 24 5/8" x 2 3/4" 
    Hino solder-on tank set

    Inlet Tank
    This tank has a 1 3/4" diameter hose connection, and an air deflector that runs along the side of the tank.
    Outlet Tank
    This tank has a 1 3/4" diameter hose connection, a seven plate oil cooler with fittings @ 18" centers (718PC), a 5/8" diameter bypass connection, and two 1/4" NPT flanges for drain and expansion fittings.

    Note:  The oil cooler has 3/4" NPT fittings.  The original cooler has quick-connect fittings with an O-ring style seat.  Adapters are available at extra cost.
  • #043008A - HDR: 25 3/8" x 2 3/4" 
    Hino solder-on tank set

    Top Tank
    This tank has a 1 3/4" diameter hose connection, a 1 1/4" hole on top for a filler neck, and an 18mm flange for a sensor.
    Bottom Tank
    This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain cock.
  • #031312A - HDR: 29 3/4" x 2 1/2" 
    Hino solder-on tank set

    Top Tank
    This tank has a 2 1/8" diameter hose connection, a 1 1/4" diameter hole for a filler neck, an 18mm flange for a sensor, and two 5/16" NC threaded holes on each end to attach side frames.
    Bottom Tank
    This tank has a 2 1/8" diameter hose connection, two 5/16" NC threaded holes on each end to attach side frames, and a 1/4" NPT flange for a drain fitting.