7 results found!
#110609A - HDR: 36 3/8" x 6 5/8" - 44 BH 
Motor Home bolt-on tank set

Top Tank
This tank has a 1 3/4" diameter hose connection, a hole in the top center for a filler neck, and two angle brackets on each end to attach side plates.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 3/8" NPT flange for a drain, a 14 plate oil cooler with the fittings spaced @ 18" (1418PC), and two angle brackets at each end to attach side plates.

Note:  samples are required to build this set.
#100406A / B - HDR: 22 15/16" x 7 1/2" - 32 BH 
Motor Home cross-flow tank set

Right Tank
This tank has a 2 1/2" diameter hose connection, a 2 3/8" diameter hose connection, a baffle inside the tank that separates the hose connections, a 1/4" NPT plug at one end for draining, a 3/4" NPT flange at the front, and a large mounting bracket.
Left Tank
This tank has a 14 plate oil cooler with 18" centers (1418PC), a 1/4" NPT plug for draining, and a large mounting bracket.
#100110C - HDR: 32" x 7 1/4" - 40 BH 
Winnebago Motor Home inlet tank

This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, a 3/8" NPT coupling for an expansion fitting, and a 3/4" NPT coupling next to the hose connection.
#100110B - HDR: 32" x 7 1/4" - 40 BH 
Winnebago Motor Home outlet tank

This tank has a 2 1/4" diameter hose connection, two mounting brackets, and a 1418PC oil cooler.
#092507A - LGTH: 48 3/4" - HDR: 7 1/2" w. 4 1/2" dp. - 6 BH 
Motor Home side frame

This frame has a length of 48 3/4", and has four 1/4" NC threaded nuts along each edge of the frame.
#071408A / #071408B - HDR: 24 15/16" x 7 1/2" - 34 BH 
Motor Home tank set

Left Tank
This tank has two 2 1/4" diameter hose connections separated by a baffle, a mounting bracket, a 1/4" NPT flange, and a 3/4" NPT flange for a sight glass.
Right Tank
This tank has two 1/4" NPT fittings (one on each end), and a mounting bracket with a 3/8" NC threaded stud coming off of it.
#052909C - LGTH: 36 7/16" - HDR: 6 3/4" w. 5" dp. 
Motor Home side frame

This frame has two 1/2" NC threaded studs @ 20 3/4" centers, 2 1/2" long, and centered both ways on the frame.

Sample must be supplied by the customer.