Taalman - Products

Products

11 results found!

#073106B - HDR: 36 1/4" x 7" - 44 BH - 30 lbs.

Champion Grader top tank

This tank has a Wabco fill neck (sold separately) in the top center of the tank, a 2 1/4" hose connection 2 3/4" long, a 1/4 NPT flange in the center of the tank facing the engine, and a 3/8" overflow tube vent. The overall height of this tank is 4" (not including the fill neck).

#073106A - HDR: 36 1/4" x 7" - 44 BH - 22 lbs

Champion Grader bottom tank

This tank has a 2 1/2" hose connection 2 3/4" long, facing towards the ground.

#071807B - HDR: 32 1/4" X 6 3/4" - 38 BH - 22 lbs.

Champion Grader bottom tank

This tank has a 2 1/4" diameter hose connection, a shutter flange, two 1/4" NPT flanges on the bottom of the tank, and a PTO cut-out in the center of the tank.

#071510B - HDR: 36 1/4" x 7" - 44 BH

Champion Grader top tank

This tank has a 1 3/4" diameter hose connection, a hole in the top of the tank to accommodate a WABCO filler neck, and a baffle.

Note: this tank is the same as tank #071510A except for the size of the hose connection.

#071510A - HDR: 36 1/4" x 7" - 44 BH

Champion Grader top tank

This tank has a 2 1/4" diameter hose connection, a hole in the top to accommodate a WABCO filler neck, and a baffle.

Note: this tank is the same as tank #071510B except for the size of the hose connection.

#051007A - HDR: 36 1/4" x 7" - 44 BH

Champion Grader top tank

This tank has a 2 1/4" diameter hose connection 5" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange next to the hose connection to accommodate an expansion tube.

#050707A - LGTH: 28 1/4" - HDR: 7 1/2" wd. 1 1/4" dp.

Champion Grader side frame

This side frame has six 3/8" NC threaded holes (three on the fan side, three on the grill side), and four 3/8" diameter by 3/4" long slotted holes.

#042407A - HDR: 32 3/4" x 7" - 38 BH - 31 lbs.

Champion Grader top tank

This tank has a 2" diameter hose connection in the middle of the tank, and 1 3/4" diameter hole in the top center of the tank to accommodate a truck filler neck. This tank also contains a baffle to create a surge-like area inside the tank.

#041707A - HDR: 36 1/4" x 7" - 44 BH

Champion Grader top tank

This tank has a 2 1/2" diameter hose connection 9 1/4" from the edge of the tank to the center of the hose connection, a 3/4" diameter bypass hose that bends 90^o towards the passenger side, a Wabco fill neck hole in the top center of the tank (offset towards the grill), and a pair of 1/4" NPT flanges (one in the corner for an expansion fitting, and one in the center for a sensor fitting).

#022511B - LNGTH: 29 1/4" - HDR: 7 1/2" wd. 1 1/4" dp.

Champion Grader side frame

This frame has six 3/8" NC threaded holes (3 on the fan side, 3 on the grill side), and four 3/8" diameter by 3/4" long slotted holes.

#021809A - HDR: 36 1/4" x 7" - 44 BH

Champion Grader bottom tank

This tank has a 2 1/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.

Note: this tank is the same as tank #073106A, except with a smaller diameter hose connection.