Products

Select a product category
10 results found!
  • #091109B - HDR: 20 3/8" x 5" 
    Hyster Lift Truck bottom tank

    This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and in this case we used a 707PC in place of the original 1210PC plate oil cooler.  Tank slopes at the grill side and at the sides.

    Note:  for this tank, a sample must be supplied by the customer.
  • #082610A - HDR: 22 3/4" x 3 3/4" - 7 lbs. 
    Hyster Lift Truck bottom tank

    This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, a channel along the back of the tank, and a 1012PC plate oil cooler (to be supplied by the customer).
  • #082310A - HDR: 23 3/4" x 4 1/2" 
    Hyster Lift Truck solder-on bottom tank

    This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, a mounting stud in the center, and a 1218PC plate oil cooler.
  • #081707A - HDR: 22 3/4" x 3 3/4" - 6 lbs. 
    Hyster Lift Truck solder-on bottom tank

    This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a 10 plate oil cooler with the fittings spaced @ 12" center to center (to be provided by the customer).
    Pairs with tank #012110A top tank.
  • #081408A - HDR: 22 3/4" x 3 3/4" 
    Hyster Lift Truck solder-on tank

    This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, a hole at one end for a filler neck, and a bracket on the grill side of the tank.
  • #072307A - HDR: 22 3/4" X 3 3/4" - 7 lbs. 
    Hyster Lift Truck solder-on top tank

    This top tank has a 1 3/8" diameter hole for the fill neck in the top center of the tank, a 1/8" NPT flange for an expansion fitting, and a 1 1/4" diameter hose connection at one end of the tank angling upward.
  • #071712A - HDR: 12" x 4 1/4" - 8 lbs 
    Hyster Lift Truck solder-on tank set

    These tanks have a 1 1/4" diameter hose connection, a 1/4" NPT flange for a drain/temperature sensor, and four 5/16" NC threaded nuts to attach side-frames.
    The outlet tank has a 1" diameter stand-pipe for a filler neck.
  • #041510A - HDR: 12" x 4 1/4" 
    Hyster Lift Truck solder-on set

    These tanks have 1 1/4" diameter hose connections, four 5/16" NC threaded bosses to attach side frames, a 1/4" NPT flange for an expansion/drain fitting, and the inlet tank has a stand pipe for a filler neck.
  • #032409D - HDR: 12" x 4 1/4" 
    Hyster Lift Truck tank set

    Inlet Tank
    This tank has a 1 1/2" diameter hose connection, a stand pipe for a filler neck, four 5/16" NC threaded nuts to attach the side frames, and a 1/4" NPT flange for an expansion fitting.
    Outlet Tank
    This tank has a 1 1/2" diameter hose connection, four 5/16" threaded nuts to attach the side frames, and a 1/4" NPT flange for a drain cock.
  • #012110A - HDR: 22 5/8" x 3 3/4" - 4 lbs. 
    Hyster Lift Truck solder-on top tank

    This tank has a 1 1/2" diameter hose connection.
    Pairs with tank #081707A.