Taalman - Products

Products

13 results found!

#2014CK - HDR: 25 1/2" X 3"

Bus solder-on tank set

Top Tank

This tank has a 2" diameter hose connection, a pair of pin mounts, a 1/4" NPT flange for an expansion tube, and four 1/4" NC threaded blocks on the grill side of the tank.

Bottom Tank

This tank as oil cooler holes @ 18" centers, a 2" diameter hose connection, a 1/4" NPT flange for a drain, a pair of pin mounts, and four 1/4" NC threaded nuts along the grill side of the tank.

Note: also has Ford Sterling applications.

#2012CK - HDR: 27 1/2" x 3"

Bus solder-on tank set

Top Tank

This tank has a 2" diameter hose connection, a pair of pin mounts, a 1/4" NPT flange for an expansion tube, and four 1/4" NC threaded blocks on the grill side of the tank.

Bottom Tank

This tank as oil cooler holes @ 18" centers, a 2" diameter hose connection, a 1/4" NPT flange for a drain, a pair of pin mounts, and four 1/4" NC threaded nuts along the grill side of the tank.

Note: same as tanks #2014CK but 2" longer.

#123009A - HDR: 27 3/4" x 4 1/4"

Thomas Bus solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1 3/8" diameter stand pipe for a filler neck and a 1/2" NPT flange on the grill side, a 1" diameter bypass, and a 1/4" NPT flange.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange, and a #1018PC oil cooler.

#113009A - HDR: 26 1/2" x 3 1/4"

Blue Bird Bus solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, and two 1/4" NPT flanges.

Note: this tank set is the same as set #112309B, except there is a 1/4" NPT flange instead of a 1" diameter heater bypass hose connection.

#112309B - HDR: 26 1/2" x 3 1/8"

Blue Bird Bus solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting on the bottom of the tank, and a 1" diameter heater bypass hose.

#112309A - HDR: 26 1/2" x 3 1/8"

Blue Bird / Thomas Bus / Freightliner
solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a mounting boss at each end to attach side frames, a 1/4" NPT flange for an expansion fitting, and three brackets on the grill side.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain, and two holes for a 7 plate oil cooler with fittings spaced @ 18" (718PC).

#101909A - Length 31"

Blue Bird Bus solder-on frames
Left Side
This frame has five 5/16" threaded studs (three on one edge and two on the other), two mounting brackets, and two 1/2" threaded nuts on the back.
Right Side
This frame has five 5/16" threaded studs (three on one edge and two on the other), two mounting brackets, two 1/2" threaded nuts on the back, and a bracket on the bottom of the frame.

#082409A - Length: 28 3/4"

Blue Bird Bus side frame
This frame has a mounting bracket on the back, two ears on the edge to mount CAC, two 1/4" NC threaded studs on the edge, two 1/4" NC threaded holes along the edge, two 1/4" NC threaded holes on the back, and a 1/2" NC threaded hole on the back.

Note: these frames have a left and a right. They are mirror images of each other. Check which one you need before ordering, or order in pairs.

#082009A - HDR: 26 1/2" x 3 1/8"

Blue Bird Bus tank set
Top Tank
This tank has a 2" diameter hose connection, and two 1/4" NPT flanges.
(similar to brass tank #4115)
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain cock, and two holes to accommodate a #718PC plate oil cooler.
(same as brass tank #3044)

Note: this tank set matches brass kit #9406.

#080609C - Bracket

People Mover Bus bracket
This bracket has five holes to allow solder flow onto the tank, two holes on each end to tie into the side frames, and two key holes for bolts to slide into.

Note: used in conjunction with tank #080609B.

#080609B - HDR: 17 7/8" x 2 5/8"

People Mover Bus bottom tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and two indents to allow for bolt heads.

#051509A - HDR: 17 1/8" x 4 3/4"

Bus solder-on top tank
This Bus top tank has a 1/4" NPT flange, and four 5/16" NC threaded studs facing the engine.

#042109A - HDR: 17 1/8" x 4 3/4"

Bus solder-on tank
This tank has two 2" diameter hose connections, two 1/4" NPT flanges for drainage, a baffle splitting the tank between the hose connections, and four 5/16" NC threaded studs.

Note: for this tank, a sample must be provided by the customer.