12 results found!
C-3408T Top tank - hdr: 50" x 13", 54 BH 

Hdr: 50 x 13, 2 bolt on flanges, each  3" dia., 1 - 1/4" NPT fitting in center

C-3408R&L rails - 45" long 
Cat side rails L&R, 45", 12" channel width, rails are not interchangeable also come in 51" length
C-3408B Btm tank HDR: 50" x 9", 50 BH 
Bottom tank hdr: 50 x 9, 1 mtg flange, 2 brkts
#120806A - HDR: 50" x 13" / 50" x 9" - 50 BH 
Cat Excavator Tank Set
Top Tank
This tank has a pair of 4 bolt flanges tapped to 3/8" NC, a filler neck (must be provided by the customer), a 1/8" NPT flange on the top of the tank (for bleeding), and a 5 bolt flange on the top of the tank.  The inside of the tank contains a deflection baffle, and there is a pair of "threaded ears" on the top of the tank for mounting purposes.
Bottom Tank
This tank has a single 4 bolt flange with holes tapped to 1/2" NC.
note: sample tanks required
#091709A - HDR: 44" x 7" - 52 BH 
Cat complete rad set
Top Tank
This tank has two 1/4" NPT flanges for expansion fitting/sensor.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, a 3" diameter hose connection, two 1/4" NPT flanges for drainage, a baffle that splits the tank left to right, and a PTO cutout in the middle.
Side Frames
These frames have 11 bolt holes on each end with 3 of them threaded 5/16" NC, and seven 5/16" NC threaded nuts along the back of the frame to attach the shroud.
Surge Tank
This tank has a 1" NPT flange for a bypass hose, a 1/2" NPT flange for a sensor/sight glass, and two 1/4" NPT flanges for expansion fittings.

Note:  this set is supplied with four washer bars 29 3/4" long with 15 bolt holes, two triangular mounting pieces, and four angled pieces with 3/4" diameter holes for welding oil coolers to the frames.

For this set, samples must be provided by the customer.
#091207A - HDR: 40" x 9 1/8" - 38 BH 
Cat top tank
This tank has a bolt-up type flange with four 3/8" NC threaded holes, located in the center of the tank, to accommodate a 2 1/2" diameter hose connection.  There are threaded bars welded along the header, each with four 3/8" threaded holes, a 1/4" NPT flange to accommodate a sensor, a raised filler neck hole in the top center of the tank, a large opening with a threaded stud in the center (typical Cat filler assembly), and a threaded bung on each end each with 5/8" NC threaded holes (for lifting the radiator).

Note:  for this tank, a sample must be supplied  by the customer.
#081111A - LGTH: 50" - HDR: 9"w. 4 3/4" dp. 
Cat side frame

10 bolt holes on each flange.
#061207B - HDR: 41" X 7 1/2" - 50 BH 

Cat Complete set

Top Tank

This tank has a 2 1/4" diameter hose connection, four 1/4" NPT flanges, a 3/4" NPT coupling, a hole to accommodate a fill neck, a 2 1/2" NPT coupling on the top of the tank, and a deflection baffle with a built-in box for the hose connection.

Bottom Tank

This tank has a 2 1/2" diameter hose connection, and two 1/4" NPT flanges.

Frames -   a 10 bolt flange at each end, and a bracket along the fan edge for mounting

Note:  for this set, samples must be provided by the customer.

#042111B - #042111C - #042111D - Access Panels 
Cat access panels

#042111B -
5 5/16" x 9 7/8"
#042111C - 6 1/8" x 13"
#042111D - 6 1/8" x 22 3/4"

For use with Cat Elphinestone shroud #042111A.
#042111A - Fan Shroud 
Cat Elphinstone fan shroud

This shroud is a two-piece assembly with three access panels for cleaning the unit out.

Note:  samples are required to reproduce this.
#030912A - LNGTH: 50" - HDR: 9" x 4 5/8" 
Cat side frame

Flange has 10 bolt holes, and there are five 3/8" NC nuts along the edge of the frame.  Frame has an inner channel.
#020711A - HDR: 24" x 5 1/4" - 34 BH 
Cat Loader bolt-on top tank

This tank has a 1 5/8" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a 1 3/4" diameter hole on the top for a filler neck.