Products

Select a product category
33 results found!
  • #122211B - HDR: 33" x 6 5/8" - 42 BH 
    Firetruck bottom tank

    This tank has a 3" diameter hose connection, two 1/2" NPT flanges, and a 1/4" flange.
  • #122211A - HDR: 33" x 6 5/8" - 42 BH 
    Fire Truck bolt-on tank

    This tank has two 2 1/4" diameter hose connections, and two 1/2" NPT flanges.
  • #122007A - HDR: 29 5/8" x 7" - 38 BH 

    Fire Truck bottom tank

    This tank has a 3" diameter hose connection, a 1/4" NPT flange for a drain cock, four brackets - each with a slotted hole, and a 14 plate oil cooler with 18" centers (the original oil cooler is a tube and shell type).

     Note:  for this tank, samples must be supplied by the customer.

  • #112107B - HDR: 29 7/8" x 6 1/4" - 42 BH (Overall 29 7/8" x 10 1/4" - 60 BH) 
    Fire Truck Top Tank

    This tank has a 2 1/4" diameter hose connection, a 1" diameter bypass hose, a 1/8" NPT flange, a 3/8" NPT flange, a 1/2" NPT flange, a 1/4" NPT flange on top of the tank, and a 1 1/4" diameter hole on the top of the tank for a filler neck.
  • #110510E - HDR: 29 7/8" x 6 1/4" - 42 BH - 18 lbs. 
    Fire Truck bottom tank

    This tank has a 3" diameter hose connection, a 1/4" NPT flange for a drain fitting, and two holes for an oil cooler @ 18" centers.
  • #110510D - HDR: 29 7/8" x 6 1/4" - 42 BH - 37 lbs. (Ovreall 29 7/8" x 10 1/4" - 60 BH) 
    Fire Truck top tank

    This tank has a 2 1/4" diameter hose connection, a hole in the top for a filler neck, four 1/4" NPT flanges, a 1/2" NPT flange for a sight glass, and a 3/8" NPT flange.
    This tank is deairated.
  • #110310A - HDR: 36" x 7" - 46 BH 
    Fire Truck bottom tank

    This tank has a 3" diameter hose connection, two 1/2" threaded mounting nuts @ 29 7/8" centers, a 1/4" NPT flange in the bottom center for a drain, and a #1418PC fourteen plate oil cooler with 18" centers.
  • #101206A - HDR: 36" x 7" - 46 BH 
    Pearce Fire Truck complete tank set

    Top Tank
    This tank has a pair of 2 3/8" diameter hose connections, a mounting bracket at the front center of the tank, and a 1/4" NPT flange for an expansion fitting.
    Bottom Tank
    This tank has a pair of 1/2" NC bolts 3" long @ 30" centers for mounting, a 3" diameter hose connection, a 1 3/4" diameter hose connection, and a 3/8" NPT plug for draining.
    Side Frames
    These frames have five 3/8" NC threaded holes on the back for mounting the frames, and ten 5/16" threaded holes along the sides for mounting the shroud.

    Note:   this set comes supplied with two 3/8" threaded tie rods 50" in length, and four washer bars that fit between the side frames.
  • #092607A - HDR: 29 7/8" x 8 3/4" - 38 BH 
    Fire Truck Bottom Tank

    This tank has a 3" diameter hose connection, a 14 plate oil cooler with 18" centers, and two 5/8" NC threaded studs @ 22" centers for mounting purposes.
  • #092308A - Bracket 
    Pearce Fire Truck mounting bracket

    This bracket has four 3/8" threaded holes, and a 2 3/4" diameter clearance hole.

    Note:  this bracket is identical to bracket #6561, except that it has the clearance hole.
  • #092107A - HDR: 29 5/8" x 7" - 36 BH 
    Fire Truck Bottom Tank

    This tank has a 3" diameter hose connection, two 5/8" threaded studs @ 8" centers, and a 1/4" NPT flange on the grill side for a drain cock.
  • #092012A-C - HFR: 36" x 7" - 46 BH - 104 lbs. 
    Fire Truck bolt-on complete set

    Top Tank
    - #092012A
    A 2 1/4" hose connection 9" from the edge of the tank to the edge of the hose connection that comes out the top and angles 90o towards the engine, three 1/4" NPT flanges on the surge tank, and a 1" diameter hose connection angled downwards below the surge tank.
    Bottom Tank - #092012B
    A 2 1/2" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the bottom for a drain fitting, and oil cooler holes @ 18" centers.
    Side Frames - #092012C (left) and D (right)
    HDR: 7 1/4" x 7" - 6 BH - 39 5/8" tall.
    Two 1/2" NC and two 1/4" NC threaded holes along the back, three 1/4" NC threaded holes along the edge on the engine side, four 1/4" NC threaded holes along the edge on the grill side.

    Bolt pattern matches tank #748.
  • #091409A - HDR: 29 7/8" x 6 1/4" - 42 BH 
    Pearce Fire Truck bottom tank

    This tank has a 3" diameter hose connection 6" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a drain cock, and a 14 plate oil cooler with 18" centers (#1418PC).

    Note:  for this tank, sample must be supplied by the customer.
  • #090109A - HDR: 29 7/8" x 6 1/4" - 42 BH 
    Firetruck bottom tank

    This tank has a 3" diameter hose connection 10" from the edge of the tank to the center of the hose connection, a 10 plate oil cooler with 18" centers (#1018PC), and a 1/4" NPT flange for a drain cock on the bottom.

    Note:  for this tank, sample must be supplied by the customer.
  • #082707A - HDR: 29 1/2" x 6 1/8" - 40 BH 
    Fire Truck Bottom Tank

    This tank has a 2 3/4" diameter hose connection on the passenger side that bends upwards, a 1/4" NPT flange for a drain cock, a 3/4" NPT flange, and a 10 plate oil cooler with 18" centers and 1" NPT fittings.

    Note:  oil coolers with 3/4" NPT fittings can be supplied, but if 1" NPT is absolutely required then the customer must supply it themselves.
  • #080911A - HDR: 30 3/8" x 7" - 42 BH 
    Fire Truck bottom tank

    This tank has a 3" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a 1418PC oil cooler.

    Note: Original tank has a 2 bolt on flange for hose connection
  • #072110E - Washer Bars 
    Fire Truck washer bar

    These bars are meant for tanks with a header size of 29 7/8" x 6 1/4" (bolt pattern matches tanks #769 or #770.  It is a "U" style bolt strip used in conjunction with tanks #072110B and #072110C.

    One pair shown here - 4 bars needed per unit.
  • #072110C - HDR: 29 7/8" x 6 1/4" - 42 BH 
    Fire Truck bottom tank

    This tank has a bolt-on type flange, a 1/4" NPT flange for a drain fitting, and two holes to accommodate an oil cooler with fittings @ 18" centers.

    Note:  this tank mates to tank #072110B.
  • #072110B - HDR: 29 7/8" x 6 1/4" - 42 BH (Overall 29 7/8" x 10 1/4" - 51 BH) 
    Fire Truck top tank

    This tank has two bolt-on type flanges, five 3/8" NPT flanges for various fittings and sensors, a 1/2" NPT flange on the fan side, a 1/2" NPT flange on the grill side, a 1" diameter bypass hose connection, a hole for a filler neck, and a deairation baffle with sixteen 5/16" NC blind threaded holes.

    Note:  this tank mates with tank #072110C.
  • #071207A - HDR: 29 5/8" X 6 1/4" - 40 BH 

    Fire Truck bottom tank

    This tank has a 2 3/4" diameter hose connection (comes out of the tank at 90o then angles up towards the engine), a 10 plate 18" center oil cooler (1018PC), a 1/4" NPT flange, and a 1/2" NPT flange.

    Front and back view shown here.

  • #061908A - HDR: 29 5/8" x 7" - 36 BH 
    Fire Truck Bottom Tank

    This tank has a 2 3/4" diameter hose connection 3" long, a 1/4" NPT flange on the grill side for a drain, two 5/8" NC studs 3" long @ 18" centers, and a 14 plate oil cooler @ 18" centers (1418PC) (replaces bundle oil cooler).

    SAMPLE REQUIRED
  • #061208B - Frame - LGTH: 43 3/8" - HDR: 7"w. 6 1/2" dp. 
    Fire Truck side frame

    This frame has eleven 3/8" NC threaded hole along the back, and six 1/4" threaded holes along the edges.  The end flanges have fourteen bolt holes (three of them threaded).

    Matches with tanks #524, #525, #526, #061208A
  • #061208A - HDR: 30 3/8" x 7" - 42 BH 
    Fire Truck bottom tank

    This tank has a 3" diameter hose connection, a 1/4" NPT flange for a drain, and a 14 plate oil cooler with 18" centers (1418PC).
  • #050112A - HDR: 30 3/8" x 7" - 42 BH 
    Fire Truck bottom tank

    This tank has a 3" diameter hose connection, a 1/4" NPT flange for a drain fitting on the bottom of the tank, and a 1418PC plate oil cooler.

    Note: Original tank has a 2 bolt on flange for hose connection
  • #032813A - HDR: 29 1/8" x 6 1/4" - 42 BH - 34 lbs. 
    Fire Truck bolt-on bottom tank

    This tank is the same as tank #090109A, but with a 2 1/4" diameter hose connection instead of a 3" diameter.

    A 2 1/4" diameter hose connection 10" from the edge of the tank to the center of the pipe, a 1/4" NPT flange on the bottom for a drain fitting, and 14 plate oil cooler with fittings @18" centers (#1418PC).
  • #031610E - Washer Bar 
    Firetruck washer bar

    This "U" style washer bar belongs with tanks #031610B and #031610C.
    40 3/8" long with 27 BH. (bolt holes)
  • #031610C - HDR: 40 3/8" x 6 5/16" 
    Fire Truck bottom tank

    This tank has a bolt-on style flange for a pipe connection, two 5/8" NC mounting studs @ 8" centers, and a 1/4" NPT flange for a drain fitting.
  • #031610B - HDR: 40 3/8" x 6 5/16" - 54 BH 
    Fire Truck top tank

    This tank has a 2 1/4" diameter hose connection on a 90o angle towards the engine, a surge tank with three 3/8" NPT flanges, and a 1" diameter bypass hose coming out of the surge tank.
  • #031307B/C - HDR: 34 1/2" X 6 3/4" - 40 BH 
    Fire Truck tank set

    Inlet Tank
    This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange on each end of the tank.
    Outlet Tank
    This tank has a 3" diameter hose connection, and a 1/4" NPT flange on each end of the tank.
    A 1/4" NPT x 3/8" diameter 90o hose barb is provided.

    Note:  these crossflow tanks share the same header as the Freightliner 454 / 456 / 458 etc., but with different hose connections.
  • #030311C - HDR: 29 3/4" x 7" - 36 BH 
    Fire Truck bottom tank

    This tank has a 3" diameter hose connection, and a 1818PC oil cooler (replaces the original "tube bundle" style oil cooler).
  • #030209A - HDR: 29 7/8" x 6 1/4" - 42 BH 
    Fire Truck Bottom Tank

    This tank has a 3" diameter hose connection pointing towards the ground, a 1 3/4" diameter hose connection pointing towards the engine, and two 3/8" NPT flanges for drainage.
  • #021909A - HDR: 29 7/8" x 6 1/4" - 42 BH 
    Fire Truck Bottom Tank

    This tank has a 3" diameter hose connection facing the ground, a 1 3/4" diameter hose connection facing the engine, and two 3/8" NPT flanges.
  • #020111A - HDR: 29 3/4" x 8 1/4" - 40 BH - 11 lbs. 
    Seagrave Fire Truck bolt-on top tank

    This tank has two 2 1/4" diameter hose connections, a 1" diameter hose connection, two 1/4" NPT flanges, a 3/8" NPT flange, and a 1 3/4" diameter hole for a filler neck.